Ion Water Rocker IPA90

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Fripacks
    Senior Member
    • Jun 2021
    • 59
    • Canada

    #1

    Ion Water Rocker IPA90

    I have this speaker to repair and someone broke and lost the transistor on Location Q11 on the keypad board, I don't have this part number, I reach the Ion company and he don't have this information, someone have it?
  • R_J
    Badcaps Legend
    • Jun 2012
    • 9535
    • Canada

    #2
    Re: Ion Water Rocker IPA90

    It is likely not critical, post clear in focus, pictures of both sides of the board so we can see what we are dealing with.

    Comment

    • CapLeaker
      Leaking Member
      • Dec 2014
      • 8146
      • Canada

      #3
      Re: Ion Water Rocker IPA90

      Maybe post a high res picture of the boards in order to see what that Q11 actually does?

      Comment

      Related Topics

      Collapse

      • sam_sam_sam
        20 year old Kenmore refrigerator ice maker bad water valve coil took a crap
        by sam_sam_sam
        I got lucky that when I got home and was about to get some ice out of the ice dispenser I hear and see water running down the outside of the ice dispenser what the heck is going on here

        At first I thought that the ice dispenser mold was cracked so I brought a new ice maker because this one has been in there for about 10 years now

        Well I put the new one in and wait and I wait for the water valve to open and let water in no such luck well there is a way to check the function of the motor and the water valve on this ice maker just need a jumper wire “L” to...
        04-09-2023, 08:04 PM
      • edugimeno
        Stagg sms12p audio amp has water damage
        by edugimeno
        Hi! My friend just brought this audio amplifier/speaker fro his music band saying they realized its got no sound. Led powers up but there no sound at all
        I opened it and found 3 board. 2 of them are for input plugs and potentiometers, and the other larger board has the amplifiers for 2 large speakers that it drives
        There's also a large toroid transformer that feeds a lower voltage to the first 2 boards and a larger voltaje (36x2 rectified close to 100v) to the power board. The power board has the plugs for both speakers
        There is only one signal wire connecting the first boards...
        05-24-2025, 06:00 AM
      • RetroComputingGrotto
        Water Damaged Toshiba 48L1435DB
        by RetroComputingGrotto
        I have a water damaged Toshiba TV that was hanging nicely on the wall then over the summer we had a new multi-million pound boiler system put in and right where this TV was hanging is a nice new pair of water pipes for the radiators...

        The TV hasnt been used for a fair few months but it was needed again the other day and needless to say, it didn't power on or show any signs of life (no standby LED etc). After checking the fuse in the plug (and that the socket it was plugged in to worked) I decided to get up some step ladders to take a closer look and low and behold! It looks like...
        10-07-2024, 08:23 AM
      • wnlewis
        Whirlpool RDE3340W electric Range needs On-Off-On rocker switch, McGill 0801-1059, FSP 686605, Whirlpool p/n 865745
        by wnlewis
        I am trying to track down a replacement rocker switch for a Whirlpool RDE3340W electric range.

        The rocker switch was made by McGill under their part number 0801-1059 and supplied to Whirlpool by FSP under their part number 686605. Whirlpool's original part number was 865745.

        The switch is an On-Off-On type (SPDT) designed for use with either 115 VAC or 230 VAC. It is not lighted.

        Are there any current switches that could be substituted for this switch?

        Thanks
        01-04-2025, 09:32 PM
      • abajor
        A2141 820-01700 Water Damage L8504 Damaged, U3100/U3200 power cycles UB300/UB400 5V .25A
        by abajor
        Like title says A2141 came in with Water Damage, customer desperately wants the data.

        The actual water ingress doesn't appear too bad it sat for a day but was very dusty internally. I have no idea why L8504 was arced there is no apparent moisture there or around the LVDS cable; however, the LVDS to screen screw studs had popped off at some point and somebody tried securing it with kapton tape.

        I had to create a micron wire pad jumper to reconnect the south side of the L8504 since the primary pad was blasted down to the vias.

        That said after cleaning up the...
        12-21-2024, 07:16 PM
      • Loading...
      • No more items.
      Working...