Allen & Heath XONE92 DJ mixer PSU board - (003-233JIT)

Collapse
X
Collapse
 
  • Page of 2
  • Time
  • Show
Clear All
new posts
Previous 1 2 template Next
  • Scenic
    o.O
    • Sep 2007
    • 2642
    • Germany
    #21
    Re: Allen & Heath XONE92 DJ mixer PSU board - (003-233JIT)

    The one you linked to has a 115mA ripple rating. From what I was able to find out that's the same as the original. Just 85°C though.

    Shouldn't be a problem. The one I linked has higher specs, but if it's a US import (expen$ive shipping) that's not gonna help lol
    BTW where does it say that? Couldn't find anything

      Comment

      • firespace
        Member
        • Aug 2010
        • 28
        #22
        Re: Allen & Heath XONE92 DJ mixer PSU board - (003-233JIT)

        oops your right, no charge, my bad too many tabs open with components, *laughs* thanks, I will order your choice, good to know I hadn’t picked something unworkable though, thanks again

        FS

          Comment

          • djkevinz
            New Member
            • Oct 2014
            • 1
            • USA
            #23
            Re: Allen & Heath XONE92 DJ mixer PSU board - (003-233JIT)

            Hi there, I am about to undergo the same project. Glad I found this post!!! It looks like it's been a couple of years since you did this, were you able to fix your PS??

            Also in case anyone would find it helpful, I found a schematic of the PS.



            I'm ordering my caps from Mouser, hope to get this going again soon!

            Cheers

            Kevin Z

            Denver CO

              Comment

              • mikedubz
                New Member
                • Nov 2014
                • 2
                • canada
                #24
                Re: Allen & Heath XONE92 DJ mixer PSU board - (003-233JIT)

                Wow thx guys for the help i hope this is the solution to my filters not working correctly .
                first off the signal seems to change even when the filter is not engaged and i twist the filter knob, then even when applying wet\dry with the filter not engeged it changes the sound and last my hpf bpf and lpf are not cutting off like they used 2.
                does this sound like a cap issue ?

                  Comment

                  • mikedubz
                    New Member
                    • Nov 2014
                    • 2
                    • canada
                    #25
                    Re: Allen & Heath XONE92 DJ mixer PSU board - (003-233JIT)

                    Hi im new to this thread and entirely new to threads all together but i was hopping on elaborate explanations to your issue hope u can shed some light cause this is what is my issue with my xone 92 as of today i noticed something weird with my mixer and i love it to death as i'm sure you do yours !
                    First off the signal seems to change even when the filter is not engaged and i twist the filter knob, then even when applying wet\dry with the filter not engaged it changes the sound and last my hpf bpf and lpf are not cutting off like they used 2.
                    does this sound like a cap issue ?
                    PLZ some light to my deep and dark tunnel of desperation .?

                      Comment

                      Previous 1 2 template Next

                      Related Topics

                      Collapse
                      • trickartt
                        Allen & Heath Xone:02 (DJ Mixer) - Burnt out Resistor
                        by trickartt
                        Hello Badcaps!

                        I am trying to troubleshoot my Allen & Heath Xone:02 DJ mixer. I have had this for somewhere close to 20 years and have played music through it in one form or another pretty much every single day since I've had it, though these days it's usually from a wireless streaming receptacle (Apple Airport) more than the turntables that are also connected to it.

                        This week my music stopped working, and after a bit of a wild goose chase, I realised my mixer was dead. I checked the 500mA fuse in the device beside the power supply and found it was blown, so I replaced...
                        05-04-2024, 12:07 PM
                      • JohnsonJ
                        Allen&Heath XONE92 DJ mixer repair
                        by JohnsonJ
                        Hello everyone.

                        I'm having issues with my DJ mixer, and after taking it apart and checking everything out, it seems that I need to replace 2 rotary potentiometers for the filter, and that the PSU has some caps burned. Hopefully these 2 fixes will solve my issues.

                        The potentiometers I will just replace (hopefully the repairman I spoke with will indeed send me the spares, in case he doesn't, I'll update here if we can find a suitable replacement), but for the PSU caps I'd kindly ask you forum members, if anyone could help guide me in the right direction. I'm having difficulty...
                        12-12-2020, 11:19 AM
                      • jaifraic
                        Allen & Heath Xone:92 (DJ mixer) no output on main out & magic smoke
                        by jaifraic
                        Hello,

                        I have a DJ mixer here, an Xone:92 by Allen & Heath.

                        When I turned it on, only magic smoke came out, so I turned it off again.
                        An optical troubleshooting has brought me quite fast to the
                        source of the smoke: two resistors look disproportionately black (see first pic)

                        Those are R73 and R74 on the master PCB. See second pic for the corresponding page of the service manual.
                        Behind those resistors are five OP-Amps (U3, U4, U5, U6 and U9).

                        My thought is that one (or more) of those is defective. I've measured...
                        03-15-2022, 12:32 PM
                      • analogicalmind
                        Allen & Heath Xone:92 mixer problem - faulty phono channel outputs on one side only
                        by analogicalmind
                        Hi all,

                        Wondering if anyone here can help – I have an Allen and Heath Xone:92 silver mixer with one faulty channel – channel 2 is only outputting on one side (right side) when set to a phono input. It works fine with a line input, and all the other channels work perfectly with phono and line inputs. I'm not sure when this happened as I rarely use the faulty channel – it could well have been like this for years! Any thoughts on what might be causing the fault and how it could be repaired? I can do some basic soldering, so I'm hoping I might be able to fix it myself.
                        ...
                        02-17-2022, 12:33 PM
                      • JTaylor
                        Allen and Heath Xone S2
                        by JTaylor
                        Hello everyone.
                        I am trying to repair an Allen and Heath Xone S2 mixer but need a schematic. I found the service manual on line but it is missing 4 pages.
                        When an input is connected to one of the four line / phono input channels I can hear the music in the cue / headphones but there is no output on the master, the input faders are doing nothing. I can connect the sound input to the mic / line inputs or the external input boards and there is sound on the master output. One of the 74HC4053D Multiplexer/Demultiplexer had blown on the slave PCB so I changed this, I also changed two of...
                        05-02-2025, 08:08 AM
                      • Loading...
                      • No more items.
                      Working...