What's the ref of the component with written "LF" on it ?

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • 21839
    New Member
    • Dec 2020
    • 4
    • France

    #1

    What's the ref of the component with written "LF" on it ?

    https://www.overclock.net/attachment...4-jpg.2462368/
    It's a long story but it got removed and I need to replace it by something similar, where can I buy one ?
  • stj
    Great Sage 齊天大聖
    • Dec 2009
    • 30931
    • Albion

    #2
    Re: What's the ref of the component with written "LF" on it ?

    are you talking about the 560uf 6.3v solid polymer capacitor with red print?

    Comment

    • eccerr0r
      Solder Sloth
      • Nov 2012
      • 8665
      • USA

      #3
      Re: What's the ref of the component with written "LF" on it ?

      Think it's a transistor, 2SC3052 or equivalent perhaps?

      Comment

      • 21839
        New Member
        • Dec 2020
        • 4
        • France

        #4
        Re: What's the ref of the component with written "LF" on it ?

        Originally posted by stj
        are you talking about the 560uf 6.3v solid polymer capacitor with red print?
        the two identical ones at the top

        Comment

        • 21839
          New Member
          • Dec 2020
          • 4
          • France

          #5
          Re: What's the ref of the component with written "LF" on it ?

          Originally posted by eccerr0r
          Think it's a transistor, 2SC3052 or equivalent perhaps?
          thank you

          Comment

          Related Topics

          Collapse

          • SluggerB
            Thinkpad T60 display, first no backlight, now nothing (long story and pictures inside
            by SluggerB
            I have an old T60 where the display was showing the "red haze" indicating the CCFL was on its way out. Eventually it developed a condition where upon a fresh reboot the display would be fine for a few minutes, and then the back light would go out. Plugging an external display into the VGA port showed the laptop was still working fine.

            I ordered a new screen, an AU Optronics 14.1" 30pin Matte LCD Screen B141XG09. I disassembled the laptop to prepare for the screen swap. When the screen showed up, the white plug was not the right kind to fit into my inverter. So I...
            01-10-2021, 05:37 PM
          • Dannyx
            "Kinetic" 433Mhz transmitter/receiver discussion
            by Dannyx
            Good day folks.

            TL;DR: has anyone tried pairing one of THESE "kinetic" battery-less switches with THESE generic remote modules ?

            Details: I recently got hit by this craze of wanting to add remote controls to the lights around my house, so I went with those generic 433Mhz remote relay modules found everywhere, which are really basic, easy to use and work well, since I used them before in other projects. What I like most about them is they accept all kinds of 433Mhz remotes that float around Aliexpress, since they're all the same under the hood, save for the...
            03-08-2022, 11:01 AM
          • szreder6
            HP Pavilion 14-ce0505sa, 5 long 3 short, no display. g7a-2g da0g7ambd1
            by szreder6
            Hello guys,
            I have a problem with my laptop as in the title, black screen, capslock displays error code 5 long 3 short, no voltage on the coils above the CPU, before removing the drive I had 0.8v there, power led flashed 5x long and the battery would not charge (current jumped from 0.5a to 2.8a), now on the power led I have a steady white light or orange when the battery is connected.
            What I did:
            - Laptop was not detecting ram, loose pins on ram slot, error 3.2 disappeared, ram working tested in another laptop

            As far as I know the laptop was in another service center...
            11-22-2024, 05:17 PM
          • chth96
            What is name of IC which is written "601Km" on its surface?
            by chth96
            Hello.

            I have T12-952 soldering station which is not able to display any screen But When I power on it, iron become hot.

            I desolder some components to check whether it have been faulty or not, But When I tried to desolder an IC Which is written "601Km" on the surface,I broke leftmost pin like attached photos.



            I use Mini Drill in order to peel off plastic suface but I cannot found copper sheet which is supposed to be pin3.

            What is name of IC which is written "601Km" on the surface?

            and Is there any...
            09-28-2024, 11:19 PM
          • howardc64
            A1312 (27” iMac 2009-2011) A1407 (Thunderbolt Display) A1316 (Cinema Display) Display Black Screen Repair
            by howardc64
            Problem

            This is an LG edge LED lit LCD Display. The LEDs are on the bottom edge of the display. There are 2 bars (left and right) Each bar has many LEDs and a 6 pin connector. Each pin drive several LEDs thus is the highest current flow / heat junction. The weak lead free solder gradually fails with thermal expansion/contraction cycling and increases resistance. PSU will compensate up to a point, then when the current is too high, PSU just shut down the backlight causing a dark display. I have even seen one which the connector just fell off as solder points became completely detached....
            08-04-2024, 10:36 PM
          • Loading...
          • No more items.
          Working...