Need help to "convert" a washing machine

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • stj
    Great Sage 齊天大聖
    • Dec 2009
    • 30990
    • Albion

    #21
    Re: Need help to "convert" a washing machine

    noisy drum = spider-bearing, if it's not direct-drive.
    also if it's not direct-drive 5-8 years is about how long the brushes last on the motor.

    Comment

    • PinGuy
      Senior Member
      • Oct 2016
      • 74
      • Argentina

      #22
      Re: Need help to "convert" a washing machine

      Originally posted by R_J
      Why don't you contact whirlpool and ask them? It never hurts to send an email and ask.
      I did, and instead of replying my question they replied I need to contact Whirlpool Argentina. No way I want to enter into such loop.
      Still waiting to find a 60Hz-capable generator to go with the mainboard and front panel to see if it turns just on...

      Comment

      • Curious.George
        Badcaps Legend
        • Nov 2011
        • 2305
        • Unknown

        #23
        Re: Need help to "convert" a washing machine

        Originally posted by PinGuy
        I did, and instead of replying my question they replied I need to contact Whirlpool Argentina. No way I want to enter into such loop.
        Still waiting to find a 60Hz-capable generator to go with the mainboard and front panel to see if it turns just on...
        Get a 60Hz UPS -- one that is capable of powering on in the absence of mains power (not all can do so) -- and use IT to power the unit. Just don't turn on the motor!

        Comment

        Related Topics

        Collapse

        • Soulzink
          Samsug washing machine. Power supply DC41-00189a board issue
          by Soulzink
          Hi everyone,

          I am trying to fix a samsung washinmachine power supply main board.
          I already replaced it with another one to fix the machine but i want to try understand the issue with the old board.
          Therefore i hope to be able to get some help to explain what to check in order to troubleshoot.
          The power supply board reference is the following: DC41-00189a
          I have followed one thread (https://www.badcaps.net/forum/troubl...ingmachine-rel...
          04-19-2025, 06:26 AM
        • Sus256
          HISENSE 65E7KQ PRO - no boot
          by Sus256
          Hi all!

          HISENSE 65E7KQ PRO
          RSAG7.820.13512 - chassis
          MT9618BAATAB - cpu
          RSAG7.820.12059 - power
          HD650Y3U77 - panel
          KLM8G1GETF - emmc

          The TV does not turn on, the standby indicator is on. All voltages are present.
          Emms is dead. Not readable, not detected.
          Replaced emmc.
          But with another dump there is no launch

          Terminal log

          UART
          <
          AC_ON
          RPMB key is not yet programmed

          HASH1_VERSION=0x00000000 64bit
          E-B
          FDE enabled
          layout pattern onebin by SAR7,0...
          06-01-2025, 02:11 AM
        • mojos911
          ASko washing machine User interface Display
          by mojos911
          I got a Asko washing machine that has had the flat ribbin cable sustain damage from some corrosion. I have tried to repair it but the ribbon cant sustain the repair and keep breaking. I was trying to source a new LED display but I cant figure out how to try and source one. the information on the back of the display is 13669-LED-A-A173-161007-RoHs. Its also a negative display witha 17v supply for the LED back light and the connectors are 26 pin x 2. What do i have to provide to try and source one of these?...
          02-02-2025, 05:03 AM
        • mojos911
          Fisher and Paykel 10 kg top-load washing machine LED identification
          by mojos911
          Hello everyone,

          I'm looking for a replacement for the red LEDs used in a Fisher & Paykel 10 kg top-load washing machine. Each LED is about 6 mm long, mounts flush to the PCB with side tabs, and measures around 1.7 V forward voltage in diode-test mode. The marking on the body is “3A56,” but I can't find any matches for that in part searches. I've attached photos to show the shape and mounting style.

          If anyone has sourced an equivalent or knows a suitable replacement, I'd really appreciate your input. Thanks in advance for the help!...
          01-17-2025, 06:54 PM
        • stomanata
          No spin on washing machine AEG L6FBA674
          by stomanata
          Hi,
          This washing machine has power module emc18aecn1 and programmer ewx14931 914913208.
          It stop after electric shock.
          When i choose only spin it show 12min remaining. After 1min it start drain pump, after
          second it start relay (measured 12v ot relay`s coil) that deliver 230V to power module.
          This is also ~1second and then pump and relay stop. After ~2min this repeat - pump,
          after it relay and both stop.
          There is no error.
          Can somebody help me to try to fix it?
          08-11-2024, 10:39 AM
        • Loading...
        • No more items.
        Working...