Re: "overvolting" transmitters for more power
If you are getting around 40 volts on the scope, assuming you have everything setup correctly and you are reading from the waveform peak to peak I would say your measurement sounds about right, I have just set this up in the workshop and I would suggest your HT is putting out around 3.2 to 4 watts in its current condition.
If you are getting around 40 volts on the scope, assuming you have everything setup correctly and you are reading from the waveform peak to peak I would say your measurement sounds about right, I have just set this up in the workshop and I would suggest your HT is putting out around 3.2 to 4 watts in its current condition.
Comment