I need a idea for something that will draw at least 5 10 or 15 amps that will be powered by a ATX power supply's 12v rail.
I had a led strip but its not long enough. Something around the house if anyone has any ideas.
People keep telling me this does'nt work but I'm using it to find a short to ground on a motherboard
I attach the 12v rail to the opposite 2nd mosfet of the one of the 2 that takes 18v turns into 12v to tell the board ok to start. Have a ground wire on ground of board to the positive end of led strip wire ,-from the ground of the led strip- to the ground on the PSU, power PSU with tweezer.
----The board first got hot but the led strip I have is too damaged for me to further test I felt the GPU only warm up on 1 board. I want need to feel the heat from the board in the area of the short.
I had a led strip but its not long enough. Something around the house if anyone has any ideas.
People keep telling me this does'nt work but I'm using it to find a short to ground on a motherboard
I attach the 12v rail to the opposite 2nd mosfet of the one of the 2 that takes 18v turns into 12v to tell the board ok to start. Have a ground wire on ground of board to the positive end of led strip wire ,-from the ground of the led strip- to the ground on the PSU, power PSU with tweezer.
----The board first got hot but the led strip I have is too damaged for me to further test I felt the GPU only warm up on 1 board. I want need to feel the heat from the board in the area of the short.
Comment