there is very little written on the board if you need more info or pictures I will post them.
Thanks
Thanks
Attached Files
-
-
Re: Can Someone help me id this board
Not a clue - are those led lights in the tubes? at the bottom?
IC is TS80C32X2-VIB ATMEL Corporation
8-bit Microcontroller 8 Kbytes ROM/OTP, ROMlessPlease upload pictures using attachment function when ask for help on the repair
http://www.badcaps.net/forum/showthread.php?t=39740 -
Re: Can Someone help me id this board
My initial guess is some sort of data acquisition board. I've worked with old 8-bit PC ISA data acquisition boards and perhaps it is an RS232 version of something similar.
May help to post a pic of the other side of the board too.Last edited by SteveNielsen; 07-10-2014, 09:44 AM.Comment
-
Re: Can Someone help me id this board
serial attached i/o
hook it up to a serial port,
set a coms program to something standard like 9600 8n1
and power it up - it may start with a copywrite message or something.
do you have the tools to lift and dump the rom chip?Last edited by stj; 07-10-2014, 10:25 AM.Comment
-
Re: Can Someone help me id this board
I figured it to be some type of serial board. I have a pace system I could lift the chip but I don't have anything to dump the chip. I was hoping it may be a rs432 board I could use it for a ptz camera. no leds. I will post a pic of the back side of the board
thanks againAttached FilesComment
-
-
Re: Can Someone help me id this board
i think the tubes are for 4mm banana jacks.
so it's probably some "educational" thing for schools.Comment
-
Vizio e601i-A3 - Has Sound and Display, But No Backlight - Bad Power Supply Board or Bad LED Bulbs ?I was given this TV from my great uncle. He said it just wouldn't turn on one day out of nowhere, replaced the TV, and gave it to me to possibly fix and use for myself.
Upon bringing it home and plugging it up, it showed a standby light.
I powered it on and without a flashlight, the display showed the "V" but the lighting is very dim, but visible.
The screen seems to blackout and stay black, but with a flashlight I can see the display.
With my Playstation 4 connected via HDMI, and running a game I can hear sound.
Assuming... -
Hi, this is my personal laptop, which the original board (lets call it Board A) blew up PU8700 (TPS51486), making a hole on the board, i had left the laptop at my desk one day with the battery fully charged and didn't touch it for a week, but when i tried to turn it on it didn't
Thought the battery was dead, so i plugged in the charger then tried to power on, the power LED blinked once, charged LED still orange, unplugged the charger, plugged in again and I noticed the "magic smoke" smell, so i unplugged the charger, removed the back cover and saw the blown IC (the "magic... -
All left and right refers to looking from rear of TV (or looking from front with TV upside down)- TV came with vertical bars and no image. Found faulty TVS on left buffer board. Also replaced T-Con (may have damaged the original while hot air removing components, board has slight warp) and have full image but few horizontal lines on the screen. Some of the lines appears to be 2 pixel tall while others are 1 pixel tall.
- Disconnecting left and right buffer board potentially reveals problems on both sides with different signals (unless this T-Con require jumper like Samsung FB_TRDY1&3) Fault
-
Hi There,
This TV was auto switching off after few seconds with some vertical lines on the screen, so got a new TCON board and replaced it.
After replacing the TCON board it was working fine and i set it up with everything, used for few hours, then had the bright idea to update the software on it. During the update process, TV switched off and now no audio or video. No relay switch sound.
More Details
TV Model - LG OLED77G1PUA
Got the same exact TCON board from TVPartsToday and replaced it. But didnt transfer the EPPROM data (didnt... -
Hi everyone,
I am trying to fix a samsung washinmachine power supply main board.
I already replaced it with another one to fix the machine but i want to try understand the issue with the old board.
Therefore i hope to be able to get some help to explain what to check in order to troubleshoot.
The power supply board reference is the following: DC41-00189a
I have followed one thread (https://www.badcaps.net/forum/troubl...ingmachine-rel...
Comment