Hi folks, I am having a problem with a LG 55EC930V. I've checked the power supply, and it only delivers 3,5V. When i bridge the PWR_ON with 3.5V, i ain't got any power at the 12V ans 24V outputs. When i bridged the DRV_ON to start the 24V panel output, i also get no voltage. The power supply is the EAY63348801 B12D198801, but i have no idea where to start fixing the power supply.
Thank you to the guys at HEGE supporting Badcaps [ HEGE ] [ HEGE DEX Chart ]
Announcement
Collapse
No announcement yet.
LG 55EC930V power supply problem
Collapse
X
-
Re: LG 55EC930V power supply problem
1) So when you bridge (force on) the connection, did you disconnect the cable between the power supply board and the main board first?
2) We need pictures of the whole backside of the TV showing all the boards, and pictures of the the whole board of the power supply board.Never stop learning
Basic LCD TV and Monitor troubleshooting guides.
http://www.badcaps.net/forum/showthr...956#post305956
Voltage Regulator (LDO) testing:
http://www.badcaps.net/forum/showthr...999#post300999
Inverter testing using old CFL:
http://www.badcaps.net/forum/showthr...er+testing+cfl
Tear down pictures : Hit the ">" Show Albums and stories" on the left side
http://s807.photobucket.com/user/budm/library/
TV Factory reset codes listing:
http://www.badcaps.net/forum/showthread.php?t=24809
-
Re: LG 55EC930V power supply problem
Originally posted by budm View Post1) So when you bridge (force on) the connection, did you disconnect the cable between the power supply board and the main board first?
Pictures will be uploaded soon...
Comment
-
Re: LG 55EC930V power supply problem
Originally posted by Diah View Postwhen you make contact to turn on 12 & 24 V you should hear relay Click. if no Click then you have open SMPS
follow this trouble shooting for yours OLED TV
By the way, this file, i used to test the power supply
Comment
-
Re: LG 55EC930V power supply problem
Originally posted by Teletoby View PostThe Relay makes a click... but no voltage, and then after a few seconds the relay clicks on and off and on and off, and when i unplug the plug, it becomes faster and faster, until the capacitor is running out of energy i guess then it stops.
By the way, this file, i used to test the power supply
2- the first bridge you made for STB as point one 1 in pdf it should remain connected when you do the second bridge and the third
3- still waiting on very clear photo as suggested by other member to the PWB from both side.
Comment
-
Re: LG 55EC930V power supply problem
Originally posted by Diah View Post1-you need disconnect the socket between PWB and T-CON driver board, also MB should be out from any test connection
2- the first bridge you made for STB as point one 1 in pdf it should remain connected when you do the second bridge and the third
3- still waiting on very clear photo as suggested by other member to the PWB from both side.
Pictures are following...
Comment
Comment