View Single Post
Old 02-08-2012, 04:58 PM   #18
Badcaps Veteran
Join Date: Oct 2009
City & State: Thessaloniki, Greece
My Country: Greece
Line Voltage: 230VAC 50Hz
I'm a: Knowledge Seeker
Posts: 1,945
Default Re: Emachines - Intel D102GGC2 board

I replaced all the KZG at this board.

For 1x Chemicon KZG 3300uF 6.3V (bulging) I used 1x Nichicon HM 3300uF 6.3V

For 4x Chemicon KZG 1000uF 16V 8mm esr 0.021 ripple 1,870 I used 4x Panasonic FM 1000uF 16V 10mm esr 0.019 ripple 2180.

I also tested the 4 non bulging KZGs and the esr showed 0.01-0.02, so they hadn't failed yet.
Attached Images
File Type: jpg 1.jpg (876.8 KB, 46 views)
File Type: jpg 2.jpg (551.0 KB, 45 views)
File Type: jpg 3.jpg (548.5 KB, 25 views)
File Type: jpg 4.jpg (371.9 KB, 43 views)
File Type: jpg 5.jpg (223.0 KB, 36 views)
File Type: jpg 6.jpg (598.6 KB, 28 views)
goodpsusearch is offline   Reply With Quote