Re: 12v 1uo941243c Relay repairable?
is this your relays ?
is this your relays ?
-
-
Re: 12v 1uo941243c Relay repairable?
i cant match them with my autodata . it is a 2004 octavia is it ?Comment
-
Re: 12v 1uo941243c Relay repairable?
i see now your relay plate can fit 14 relays .. will look at autodata again laterComment
-
Re: 12v 1uo941243c Relay repairable?
hope pics are good enough i couldn't get print screen to work properly so used camera .Attached FilesComment
-
-
Re: 12v 1uo941243c Relay repairable?
Thank you very much, will it fit my car? because as you see on my plate i have some relays more exactly 4 which contains 2 integrated dual relays like number 455,389 which are clear but then 175 and the one which is between 100 and 409 this makes it difficult and follow your pictures but the pictures themselves they are ok. do you have possibly schematic to fuel pump on your autodata?Comment
-
Re: 12v 1uo941243c Relay repairable?
i have it but can only save as xps and it looks like this website cant deal with it .. will have to learn how i can change it . ah will put on stick and plug into linux pc .. autodata is on my windows work laptop .Comment
-
Re: 12v 1uo941243c Relay repairable?
hoping this works i didn't check if it converted properly .Comment
-
Re: 12v 1uo941243c Relay repairable?
what codes are coming up on your scan tool ?Comment
-
Re: 12v 1uo941243c Relay repairable?
P0725 rpm sensor circuit . P07255 not found please check code .
thinking the crank sensor wire breaks right next to sensor .also failing battery will cause problems starting
P1780 not found
P1850 not found
autodata hasn't got transmission codes .
clear all codes and see what comes backLast edited by petehall347; 09-25-2022, 01:49 PM.Comment
-
Re: 12v 1uo941243c Relay repairable?
i have cleared three four times the codes but they keep coming back and the car still cranks but does not start maybe i should try to find this sensor and clean and test to see what it gives . petehall347 i appreciate and thank you for your support and wonder if i can pm you because i think we are off electronics topic on this threadComment
-
Re: 12v 1uo941243c Relay repairable?
plenty of electronics involved . if you look at live data on your scan tool it should have rpm .. or maybe not depending on the scan tool . also if you have an an oscilloscope you can check the waveform directly from the sensor . will tell you a story about this .i was called out to a job the experts couldn't fix i hooked up my bench oscilloscope and the car started up .after that it started every time .not saying this will work for you but you can see if sensor is working ok before checking the wiring ,Comment
-
Re: 12v 1uo941243c Relay repairable?
not just the sensor - clean the flywheel or whatever it is sensing.
i know on some old cars if you got lots of mud on the toothed wheel it couldnt sense itComment
-
Dear members,
I have a linear variable power supply with unknown brand name that I used for voltage injection.
Then it failed. I discovered that its transistors (Q1 and Q2) are shorted.
In addition, I discovered that its zener diodes are defective.
I can replace the burned transistors.
But I do not know the model of the zener diodes. the model number is not marked on the zener diodes.
Therefore, I cannot replace the zener diodes.
I do not want to test the zener diodes in a test circuit to discover their model or value.
no schematics are available... -
Yesterday I successfully repaired a Middle Atlantic UPS2200R-IP that had inadvertently been used as a surge suppressor at our transmitter site. It has already been replaced with an updated one but it's coming home with me now instead of being e-cycled. To be specific, this is the MA model that has the blue backlit display and has been discontinued, although this design may have been used in many UPS units including the smaller Middle Atlantic ones in this series.
Here's what happened: We experienced a brownout/surge at the site, which damaged the UPS and took our broadcasting... -
I was working on this CNC machine today found no keyboard functioning no control relay powering on
The screen powered on and was giving an operation error but the manual was not very clear about what the error exactly was but with a little bit of troubleshooting and finding out that the control relays not powering on and no keyboard functions we narrowed down to this one switching power supply which of course does not have any indicator LED light they are on the keyboard interface/relay controller board
Found shorted diodes on main controller relays there are 3 of them that... -
First off,
Happy New Year everyone!
Someone recently asked me to look at their Philips 42pfl4508g/78 TV which had stopped working.
A quick visual check of the PSU revealed a ceramic cap with a hole burnt through it, and that the output voltages were wonky. The 5.2v Standby was only 3.2v. The 24v - 19.1v and the 12v - 11.2v. We found a cheap 'guaranteed working' replacement PSU online, which they bought and installed but it still the TV didn't switch on, and when I went back to test the new PSU board, it showed the same kind of low output voltages.... -
Hi folks. As the title says, I was doing a port replacement on a Lenovo Thinkpad T480s and in the process of post-solder cleaning, I somehow knocked off 2 or 3 diodes (i think they are diodes) near the main usb-c. I can't seem to find what kind of a diode is that. I know it's ultra tiny and just has a letter "G" on it. Would someone maybe have a proper schematic for the t480s model? I can only find the non-s one and it's quite different to the "s". Would love to figure out what component that is.
Thanks in advance!...
Comment