Badcaps - Explore our electronics repair forums

Collapse
 
  • Time
  • Answered
  • Show
  • New Topics
Clear All
new posts

  • rog ally rc71L-ally.z1_512 corrupt bios

    i recently purchased an rog ally that was used with smokeless and has a corrupt or bricked bios and im trying to find a clean copy of the bios to flash, i believe i may have found one but now im unsure of where to place my serial numbers

    any help on sourcing the bios file or where to place serial numbers would be greatly appreciated


    model: RC71L-ALLY.Z1_512
    sn: R8NVKD01535633G
    cn: N03F
    See more | Go to post
    Last edited by lohwlyfe; Today, 02:13 PM.

  • gustavoderr
    started a topic Corrupt bios

    Corrupt bios

    need help with dell latitude 5440 bios corrupted kindly if someone can fix this problem of ours. Thanks in advance.

    Service Tag: 59NZX24
    See more | Go to post

  • madjid911
    started a topic HP OMEN MAX 16-ah0006nf bios

    HP OMEN MAX 16-ah0006nf bios

    Hi,
    Can you clean this bios with a new image or clean the intel region please ?

    Because the laptop starts but no display, the shift key flashes 5 times long 3 times short, this indicates a corrupted bios according to my research, I did not find a bios like this model, so I attach the original one.

    For HP OMEN MAX 16-ah0006nf intel i7
    SN : 5CG5171Q12
    Motherboard : DOJO51-MV-GBM 6050A3604401-MB-A01 2025-03-18...
    See more | Go to post

  • Board View / Schematics Dell 5411 LA-J271P Rev 1.0

    Hello Folks, you could help me with A board view or schematics for my Dell 5411 LA-J271P. Its not doing the POST, only negotiating 20V at the USB-C for 5 seconds, then falling back to 5 V. no short int the power rails. The CPU Vcore Rail has 1.8 Ohms, wondering if this is too low. Any hints how to proceed diagnosting?
    See more | Go to post

  • Hisense 65R6E3 double-image / horizontal strips - TCON?

    Hello all. 3 years back, with your help, I replaced the LEDs on this TV. It's been working great. Yesterday, I turned it on (garage TV), and it has blurred horiz / vert lines as you see in photos. Definitely no physical hit or damage. Top 1/6th of the screen is perfect. Could it be main / TCON board? No tabs to cut on this model. Thank you...
    See more | Go to post

  • Tx-pr42gt30 6 blink

    👋🏻I recently got a tx-pr42gt30, I bought it in non-working condition. When I opened it, I saw that all the transistors and diodes had been removed from the tnpa5330, and several microcircuits were in poor condition, so I decided not to try to repair it. Instead, I bought another tnpa 5330 (also AB), which was already repaired (according to the seller, the board was repaired and worked before the screen was damaged), transistors were also changed on it, but Chinese copies were installed (there is no round hole in the middle, the inscription is easily erased) and a pair of transistors that...
    See more | Go to post

  • Asus VivoBook D415U disable ram

    Hello everyone,

    I have a problem with the RAM memory that is soldered onto the motherboard. Can someone please help me with how to disable the soldered RAM, possibly by removing or shifting resistors? The model in question is an Asus VivoBook D415U.

    I’m attaching some pictures.

    Thank you all and best regards!...
    See more | Go to post

  • Hi, Can we use SMPS Bench Power Supply for Laptop troubleshooting?

    Hi all, I just need to know that, can i use SMPS type power supply to test and short circuit detection on a laptop motherboard?
    I saw 95% of repair guys are using only Linear bench power supply. linear bench power supply is pricy, thats why i planned to get one SMPS supply.

    i know that in linear power supply the noise will be very low comparing to SMPS supply....
    See more | Go to post

  • vizio d40f-j09 no pic no sound standby always clear

    hi
    anybody have experience with this model tv
    See more | Go to post

  • HP 15-eh0001nf with a start issue

    Hello, I have an HP 15-eh0001nf with a start issue,
    • First it didnt start at all power button blinking blue and no screen, but seems a boot loop*
    • I tried to remove most component - > same issueI see some little corroded component, clean them with isopropyle alcool and resamble all -> it worked during less than one minute and did the same issueI
    • tried to clean it again and worked few second and get same issue...
    • Now dont want to start anymoreI see on thermal cam a component getting a bit hot (qr=7j 13g) and didnt find any information about it (, i tested all rail and no short..µ
    ...
    See more | Go to post
No content found
Show More
 
  • Time
  • Show
  • New Topics
Clear All
new posts
Please log in to your account to view your subscribed posts.

What's Going On

Collapse

There are currently 430997 users online. 4007 members and 426990 guests.

Most users ever online was 1,342,976 at 10:51 PM on 04-26-2024.

Badcaps Statistics

Collapse

Topics: 221,654   Posts: 1,514,725   Members: 592,290   Active Members: 20,637
Welcome to our newest member, nissoco.

Forums

Collapse

Top Active Users

Collapse

Today's Birthdays

Collapse

Latest Topics from Friends

Collapse

There are no results that meet this criteria.

Working...