leszekp
Member
Last Activity: 04-19-2025, 01:25 PM
Joined: 03-07-2017
Location: Koszalin
-
Second - without succes , maybe hardware problem , not software . I have not oryginal perm partition , it is possible Netfilx will not work on refurbished KLMAG1ETD . -
Thanks a lot - IC is just like new .Can You send for KLMAG1ENB too ?...
Leave a comment:
-
Thanks for answer , I will try.Leave a comment:
-
KLMAG1ETD- TP point
Hi , I am looking TP point for KLMAG1ETD in MT58CU chassis TCL .I have not seen it in UFI pictures . -
Try this NVM Files - [url]https://drive.google.com/file/d/1syAqGzSifPoZ9MZaVsutIfkSBqzVFWGW/view?usp=sharing[/url]https://Try this NVM Files - [url]ht...=sharing[/url]Leave a comment:
-
TNPH1116 emmc reading
Hi friends.I have strange situation with TNPH1116 motherboard . I can't connect via isp with emmc - KLM4G1FEAC .But I can read this board with emmc Toshiba - same connections , same programmers - Z3X and UFPI . I can't find good way to solve this problem . I have done it with internal and external supply . -
Re: Philips 22HFL3232D/10 hotel unlock?
This one , from ASWO ....Leave a comment:
-
Re: Philips 22HFL3232D/10 hotel unlock?
[url]http://www.telecontrol.tv[/url] - with this remote .Re: Philips 22HFL3232D/10 hotel unlo... this remote .Re: Philips 22HFL3232D/10 hotel unlock?
[url]http://www.telecontrol.tv[/url] - with this remote .Leave a comment:
-
Re: Philips 22HFL3232D/10 hotel unlock?
You need to use RC2573 .You can use learning remote Venus , Superior , or Classisc .Leave a comment:
-
Re: Philips 22HFL3232D/10 hotel unlock?
Try combination from LC43HELA - 024995 Menu , maybe will help. Setup remote is RC2573 .Leave a comment:
-
Thomson 43UG6300 logo .
I have 43UG6300 with logo and nothing more . I can't update via usb .I can't unlock uart .After change dump emmc same situation . Is it possible to unlock uart in this situation ? Short uart log in attachment . I am not sure - hardware , or software fault .... -
Re: Sony A1e 5-blinks help
You need pre-programmed eMMC , I think , just like in older Sony chassis .Leave a comment:
-
Re: Sony A1e 5-blinks help
Older Sony chassis has error 8 , when software corrupt .Which is panel manufacturer ?Leave a comment:
-
Re: KLM4G1FEPD - boot mode
I have done with Z3X , without TP point .My mistake .Z3X need to write correct new CID with new firmware .I ' ve tried to write new firmware without new CID without succes .But with new CID and new firmware is ok .Leave a comment:
-
KLM4G1FEPD - boot mode
Hi . I have emmc KLM4G1FEPD from mainboard Samsung tv set in boot mode status . I can't reflash firmware in this ic .I have done succesfully new firmware in other Samsung emmc - for example - KLMAG1ENB , or KLM4G1FEAC , but with KLM4G1FEPD both my tools - UFI and Z3X can't reflash .UFI and Z3X reading firmware succesfully .I am not sure - TP point is correct .Maybe someone knows TP is correct ?... -
Re: Sony KD-65XE9005 emmc .
Thanks for help .I need replace ic , I think.Leave a comment:
-
Re: Sony KD-65XE9005 emmc .
Connect via wires - direct emmc .Leave a comment:
-
Re: Sony KD-65XE9005 emmc .
I am working with Ufibox ,RT809h too .Leave a comment:
-
Sony KD-65XE9005 emmc .
Hi friends .I have this set absolutely death .Power is ok .I have not acces to boot1,boot2 and user via emmc programmer.Programmer logs said - user area protection -0x50 ,I don't know , how disable it.I can read emmc , erase , but can't write.EMMC is KLMAG1ENB B041.Can I disable this protection or I need change emmc?... -
Re: New Members - please post your introductions here
Hi friends .New member ,repairing tv .Leave a comment:
No activity results to display
Leave a comment: