fauzanmint
Senior Member
Last Activity: 05-16-2026, 08:39 PM
Joined: 06-07-2018
Location: Jakarta
-
Try increasing your power supply voltage to 22V -
Is it ok installing a Type-C without Controller IC?
Is it ok installing a Type-C adapter on a laptop when the charger controller IC is removed? I am repairing a laptop with a burned charger controller IC, and after replacing it with a new IC, it burned again. I want to check the voltage on the ics pin without the Type-C controller IC soldered -
backup your bios...Leave a comment:
-
backup your original
biosLeave a comment:
-
send the 16mb EPROM backup results...Leave a comment:
-
i have same issue, hahe you solve it?Leave a comment:
-
try and give a report...Leave a comment:
-
send your bios backup and Serial numberLeave a comment:
-
Is any idea to disable ps_id ?...Leave a comment:
-
Can NOT Unlock SPI IC Gigabite GD25Q128X
hi i got ic spi with serial number GD25Q128X which can't be unlocked. i used some programmers and it didn't work. i have tried to read then unlist all keys then write but it is still locked...
-
Install the battery while the laptop is off. Check on bios pins for small voltages and they are usually unstable up and down. Find out the problemLeave a comment:
-
sometimes we can disable onboard ram by editing bios...
Leave a comment:
-
Chromebook can't turn on without a normal battery
I have several chromebook laptops, the problem is that the battery is damaged. I tried to buy 1 and I tried on all off units can turn on normaally. This means the Chromebook can't turn on without a normal battery.
is there a way to turn on a chromebook without a battery with bios or hardware modifications? -
when i plug in the battery the voltage goes up to 12.1V and it is look like charging the battery...
Leave a comment:
-
Thinkpad A485 won't turn on
I am working on a Thinkpad A485 laptop, board code NM-B711 with a problem that it won't turn on.
I checked this board using the BQ25700A charger ic. On the B+ output I get a voltage of 9.16 Volts (page 58th) is the B+ voltage normal?... -
me pch pmc cleaned
ST: 3JLZ9K3...Leave a comment:
-
you can cut the new bios with hxd. but unfortunately i didn't find the cse me on the oldbios. you probably have a corrupt copy...
Leave a comment:
-
try...Leave a comment:
-
try and provide a report...Leave a comment:
-
Try it and report...Leave a comment:
No activity results to display
Leave a comment: