best cheap/free scores 1.1

Collapse
This is a sticky topic.
X
X
 
  • Time
  • Show
Clear All
new posts

  • stj
    replied
    Re: best cheap/free scores 1.1

    have you seen the little pcb's that hold the tantalums and a few ceramics and has the same footprint as the tokins? i saw a guy on twitch fitting them.
    it makes fitting a lot faster.

    Leave a comment:


  • Dan81
    replied
    Re: best cheap/free scores 1.1

    I prefer the online version since it's updated constantly and I do check logs on each unit.

    (that's how I landed on a BC enabled CECHC04 that just needs tantalums in place of the TOKINs - whole log is FULL of just 1001 and 1002 errors.)

    Leave a comment:


  • stj
    replied
    Re: best cheap/free scores 1.1

    you dont actually need BG online, there is a cutdown version you run on your own webserver - or even a router

    Leave a comment:


  • Dan81
    replied
    Re: best cheap/free scores 1.1

    Today's score is a HEN modded PS3 slim, CECH-2503B datecode 1A, with a genuine blue Dualshock 3, 8 games, two thicc HDMI cables (EXTRA THICC I may add), AC cord. Runs HEN 4.88.

    Can be CFW modded so probably the HEN mod was done before the bgtoolset exploit was available.

    Leave a comment:


  • stj
    replied
    Re: best cheap/free scores 1.1

    damn that must be rare - hardly anything online about it.
    is it really 540w? i doubt it, but you never know.
    specially if thats total of both channels.

    Leave a comment:


  • Xenon-Codex
    replied
    Re: best cheap/free scores 1.1

    Again stereo equipment, a freebie Mitsubishi. I need a schematic, hifiengine does not have it. It's a DA-U56X.
    Attached Files

    Leave a comment:


  • Topcat
    replied
    Re: best cheap/free scores 1.1

    I made a silly lowball offer on a NOS VP6 still in the box lst night. Woke up this morning to an acceptance. I really didn't think the seller would go that low....I was expecting a decline or a counter-offer....and it's only monday morning!! I take VP6's and make retro 3DFX rigs out of them and sell them on occasion. When complete, recapped, and paired with a 3DFX card (voodoo3 usually), they sell for a nice profit.

    Leave a comment:


  • madan1
    replied
    Re: best cheap/free scores 1.1

    Probably my best cheap score of the year is a FBT J8A 8" active speaker. Got it from the usual scamplace ebay for about 20EU (~350-400eu current retail price). Described as "flooded, working but with distorted sound". After receiving it, I did not notice any water damage or signs of water neither on the amp board or the speakers. Just for in a case I removed the yellow glue of death from the pcb and after figuring out the input signal plugs I realized what a gem I've scored! I have always been skeptical about class D amps and small size speakers, but what a surprise this one is!

    Leave a comment:


  • Dan81
    replied
    Re: best cheap/free scores 1.1

    Today's score would be an ECS (haven't heard of them in quite some time!) latpop, a Green736 to be specific.

    2.8GHz Northwood (non-HT, 800FSB)
    Radeon Mobility 9600
    512MB DDR333
    1400x1050 SXGA display.

    Leave a comment:


  • Topcat
    replied
    Re: best cheap/free scores 1.1

    Today a couple P4-era PC's and a box with a bunch of junk cards in it...and every card pretty much was. Old modems, junk video cards, and one gem....

    Nothing less than a Voodoo5 5500!



    Tested in nothing less than a VP6.





    Card pulls ~1A under test loads, I connected it to the PCIe power connector. I imagine under heavier loads that will definitely go up. THis of course also assuming it doesn't draw from the 5v rail....I am not sure if it's relying solely on the 12V rail. The 12v rail is the only one monitored on the PCIe interface in the Oven. Fans were making a little noise, but nothing to get too excited about....but for a free voodoo5, I will not complain!
    Attached Files

    Leave a comment:


  • Xenon-Codex
    replied
    Re: best cheap/free scores 1.1

    This Luxman is saved from the dump. Needed a bit acting, and the "watcher" went away so I could save this. It's missing the flat cable between the know and the selector switch. These Alps parts are common, so maybe I can find a spare part. The thing itself is working.
    Attached Files

    Leave a comment:


  • Topcat
    replied
    Re: best cheap/free scores 1.1

    Originally posted by dmill89
    The PC Power & Cooling Silencer MKIIIs are essentially just re-badged semi-modular versions of the Seasonic S12II, so very solid PSUs.
    Thanks for the info. I just hope I don't need any additional modular power connectors for it....

    Originally posted by TechGeek
    That rackmount system was probably a surveillance DVR, given the large amount of drives and the two GPUs, likely used for hardware-accelerated video encoding and processing.
    Possible I suppose....but I've never seen a surveillance interface like this one...and I've seen theirs when I picked this stuff up.....gazillions of IP camera feeds. The only place in the building and grounds that can't be seen by a camera are the bathrooms.....but their bathroom entrances are sure watched. Given some of the weird interfaces on it, I believe it's a controller for an ATM. I'll ask next time I talk to the IT director.

    FWIW, the Asus P8H77-V passed ~17hrs of abuse in the oven with no errors.

    Leave a comment:


  • TechGeek
    replied
    Re: best cheap/free scores 1.1

    That rackmount system was probably a surveillance DVR, given the large amount of drives and the two GPUs, likely used for hardware-accelerated video encoding and processing.

    Leave a comment:


  • RJARRRPCGP
    replied
    Re: best cheap/free scores 1.1

    Originally posted by Topcat
    The tower I've got is dated Sept 1994.
    1994 is indeed the "FDIV"-Pentium-bug-era!

    Leave a comment:


  • dmill89
    replied
    Re: best cheap/free scores 1.1

    Originally posted by Topcat
    so I pulled that and the PC Power & Cooling PSU from the case. I was impressed with the PSU build quality, all primary & secondary caps were UCC! The only annoyance is it being modular and of course I don't have all the cords for it. Fortunately the essentials are all there.
    The PC Power & Cooling Silencer MKIIIs are essentially just re-badged semi-modular versions of the Seasonic S12II, so very solid PSUs.

    Leave a comment:


  • Topcat
    replied
    Re: best cheap/free scores 1.1

    A bank called and said come grab a pickup load of junk....and here we are!



    There was also a Lenovo Ideacentre 510-22ASR AIO that rode in the cab. Mint condition....This one will be detailed in another thread.



    Back to the servers..... Both the towers are Haskwell E3 Xeons in pretty useless server boards....so nothing to get too excited about.









    Now for this goofy thing in an Antec rack case. I've got no idea what this internal hardware would be used for in a bank....it'll make sense in a minute...



    Has onboard GPU of course.....and then this....looks like some kind of dual GPU PCIe setup....





    SSD hiding in there along with the 2TB HDD's.



    This stuff goes directly to the scrappers...no passing go or collecting $200.



    The keeper pile.... I want to play around with thise Kyrocera printers... That HP is a monster color laser.... Worth looking at before junking.



    Some network gear. That will wind up at the e-waste recycler eventually...I usually wait until I've got a full gaylord....they pay a nice bounty for metal cased network gear.



    Pile of Polycom IP phones....



    Now back to this weird one in the Antec rack case..... The motherboard is an Asus P8H77-V.....a looooong way from IT grade...and of course those two mystery GPU's. The system still functions off the onboard when I tested it, I got no display from any of those others, they're obviously controlled by software not the system BIOS. I was not able to identify them.





    Here's the board. 3rd gen I7-3770 @ 3.4GHz w/ 16gb RAM. Even today it has the makings of an entry level gamer....so I pulled that and the PC Power & Cooling PSU from the case. I was impressed with the PSU build quality, all primary & secondary caps were UCC! The only annoyance is it being modular and of course I don't have all the cords for it. Fortunately the essentials are all there.



    It ran stable when I had it on the workbench.....but it'll spend the night in the oven.....





    Loads are pretty light.



    ...and that's all for this batch other than testing the printers....not that I'd post about that....who cares about printers....
    Attached Files

    Leave a comment:


  • Dan81
    replied
    Re: best cheap/free scores 1.1

    Not much for today, but didn't come home empty handed either from the local car boot sale.

    - PS3 OG Sixaxis - pretty rare IMO, it's the model without rumble motors.
    - Chaintech CT-9BJA0 - i845, SDRAM mobo on 478. Bought it to replace the 423 I sold, though it seems to need some recapping (and a AT-styled connector)
    - ASRock Z77 Pro3 - scrap, the socket is mangled and bending half of the pins already got me dizzy (not even joking)
    - Dell Studio 1737 - works, sits aside for now as I cannot source any replacement LCD cover, hinge and power button. (I had to power it through the touch buttons above the keyboard)

    Leave a comment:


  • Topcat
    replied
    Re: best cheap/free scores 1.1

    Ok, nothing to get too excited about, but I have noticed that white socket P4's are starting to get a little more scarce. This one is an Aopen S661FXm uATX with a Prescott @ 3GHz and 1GB RAM, it was in a full ATX case...so I yanked it....I'll find a more befitting uATX case for it....someday.. The only reason this one didn't meet the scrap bin, it has an 8x AGP.

    In the oven.



    CMOS battery was dead of course.



    Caps are ok, new batt, and booting fine.



    Loads... Pulls from the +12v EPS rail and the 3.3v rails only. Nothing from the 5v rail. Memory is obviously what's tugging on the 3.3v rail; memory-related tests had the 3.3v rail pulling 6~7A and the CPU (12v EPS rail) would drop to ~4A. When motherboard/CPU tests would run, the 3.3v would drop off to ~4A and the EPS rail would be around 6~7A.

    I'll just bag this one up for something later....eventually a build idea will come up.
    Attached Files

    Leave a comment:


  • Dan81
    replied
    Re: best cheap/free scores 1.1

    Gotta update the thread with these:

    - loads of Xbox 360s:
    - 2x Xenon phats - both RROD, one has 0102 which equals trash, one has 0020 which means there's chances of it to come back after some TLC.
    - 1x Trinity slim - previously modded by someone with RGH3, yet I also found one of those interesting glitch chips based on Xilinx CPLDs. Removed the chip as it wasn't connected anywhere.
    - 2x Falcon phat - one RROD 0020 due to previous failed RGH3 mod which ripped a trace for the GPU, one untampered board unit sans the RF powerboard. Latter got most of the parts from the RROD unit transplanted onto it, except the DVD drive which I had to source from the 0102 RROD Xenon (neither of the drives I got with the Falcons worked at all)
    - HP dv6-3298eg - i5 460M/HD6550M 1GB/2x2GB/noHDD. Bottom case and LCD cover had to be replaced.
    - PS3 backwards compat, CECHC04 - bad NECs, evidenced by syscon log being full of 1001 and 1002 errors
    - MSI CX620 - hangs at random points after power on except BIOS.
    - Sapphire HD4870 1GB Vapor-X - works but one of the screws broke, not sure how I'll be able to remove it

    Leave a comment:


  • Topcat
    replied
    Re: best cheap/free scores 1.1

    Originally posted by TechGeek
    Is that monitor from the early-90s? (pre-94)
    It's datecoded July 1996. The tower I've got is dated Sept 1994. Close enough for most, but they're still a couple years apart.

    Leave a comment:

Related Topics

Collapse

  • H34TO
    ITE IT8390 (IT8390E-256) programmer "ITE Download Board 4" user manual + firmware, flashing ITE ECs on the cheap
    by H34TO
    Recently I've gotten into EC flashing due to my broken laptop(s) and started frantically searching methods for flashing the IT5571E-128 chip on the cheap(due to me beaing a student and not having a job) and noticed that ITE newer chips can be flashed via ISP (In-System Programming) either via SMBus or the KBC (EPP - Enhanced Parallel Port) interface. While these can be achieved with programmers like SVOD4/3 or the RT809H/F those options are WAYYY out of my budget so I was horrified. But recently I stumbled uppon some programmers on aliexpress that claim they can program a variety of ITE chips...
    06-17-2025, 07:17 AM
  • evilkitty
    When your mom is complaining about her new cheap lights
    by evilkitty
    My Mom bought some cheap motion sensor lights on wish... then complains about about batteries and this thing chews though them, well it uses 4 AAA batteries and a pack of rechargeable ones is about 13 USD

    well since it uses 4 AAA and rechargeable are 1.2v and non-recharge at 1.5 this thing must work with 4.8-6v, I'll shove a USB cable on it, infant i will use a broken phone charge cable... dam this thing uses 430 mA and they made it battery powered...


    lets ignore the fact that i thought the board fit both ways... and the wire color is reversed going to the board...
    07-23-2024, 01:27 PM
  • aaronkatrini
    Recommend a decent Multimeter on the cheap
    by aaronkatrini
    Hi all,

    I was looking to upgrade my main multimeter (Asita MD591) with something that has more features. I'll use it mostly for board diagnostic and diy repairs. I've been eyeing out many of those multi-function ones from Aliexpress but can't seem to make my mind up. Here are the features that I'm looking after:

    - Autorange
    - DC volts up to 30V
    - Accurate Resistance
    - Diode test (Beep mode)
    - Frequency up to 200MHz
    - Capacitanze up to 5000uF
    - as cheap as possible

    Other functions are not needed but those which are needed...
    05-06-2024, 09:54 AM
  • Dan81
    The Cheap Duo - Two SiS machines
    by Dan81
    Just as the title states. Two cheap SiS machines, surprisingly stable.

    What I will tackle in the near future (the build will be slightly postponed due to slight stomach issues - am still recovering and my physical power (sorry if it sounds weird,English isn't quite my primary language) isn't the best at the moment. Especially with the diet I have to take at the moment.) are two SiS based machines.

    The first one is a IPC rebranded Mitac 7521T. Why did I feel the need to tackle this machine? Well, just look at the specs:

    CPU - P3 1100MHz Coppermine...
    04-16-2022, 12:28 PM
  • eccerr0r
    Caseless Cheap Chinese electronic tools
    by eccerr0r
    "Caseless Cheap Chinese electronic tools" I mean things you get from banggood, ali, fleabay, Am-Zon, etc. like AVR-Transistortester, miscellaneous signal generators, frequency counters, (variable) power supplies, oscilloscopes, low resistance meters, etc., etc. that comes optionally with a case, or comes only with a cheap piece of plastic that barely provides protection to the PCB.

    Just wondering what of these (generally flimsy) tools you actually find use (almost) everyday and find indispensable for the price, compared to buying a Fluke or whatnot, if there is an expensive...
    11-23-2021, 03:44 PM
  • Loading...
  • No more items.
Working...