Home Automation Controller (AKA: a Rebranded Industrial Machine)

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • pentium
    Badcaps Legend
    • Mar 2006
    • 2778
    • Canada

    #1

    Home Automation Controller (AKA: a Rebranded Industrial Machine)

    This was found at a used construction supply and demolition salvage center last time I was in Vancouver. They labelled it a "Home Automation Computer" and they said it and a bunch of other stuff was pulled from a house they demolished in West Vancouver. I couldn't find anything else that might be related to it.





    Some searching found the case was sold by Arise who specialize in industrial computers. There's no hard drive but the machine has a 3.5" floppy and a ZIP drive. Worth noting the 250W PSU is autoranging and is actually really well built with UNC's on everything.
    The SBC computer within is a Teknor Applicom T946. 500mhz Celeron, IDE, Networking, VGA etc.



    Some of the pin headers are labelled but the rest are not. The cabling for the front power/HDD led and the reset button were not plugged in so I have no idea where to connect those and I can't find any sort of manual for the SBC. That paddleboard (next to that hilarious CMOS battery hack) was found bouncing around inside the case and looks like you put a Compact Flash card in there. I guess they pulled the card and threw that back in but it means I don't know what OS this used to run, or what the automation software was.
    Has an Award BIOS however with the LOGO option.




    The rest of the cards in the machine are as follows:

    Equinox Megaport 8CS (I have one of these already. It's an 8-port RS-232 board and all the ports are RJ11)
    Creative Sound Blaster CT4170 (A fairly typical Vibra chipset sound card with a cable running from the TAD port to the modem)
    Aplha Elite V32 (dual VGA video card with a Nvidia Geforce FX5200)
    US Robotics 56K modem (Seems to support data, fax and voice which I guess explains the TAD audio cable)
    There's also one open PCI slot. No idea what might of been there.

    There's two fans in the case and everything is otherwise passively cooled. It's also really quiet. I guess it was installed in a closet somewhere and ran 24/7.
    It's an OEM something using parts from a number of vendors. I'm finding absolutely nothing here in regards to it being used in home automation but I've been proven wrong before. By off chance has anyone here ever come across something similar? Does anyone know where I could find the manual for the SBC?
    Attached Files
    Last edited by Per Hansson; 03-31-2017, 12:22 PM. Reason: Offsite images uploaded
    Find Nedry!


    Check the Vending machines!!

    <----Computer says I need more beer.
  • R_J
    Badcaps Legend
    • Jun 2012
    • 9535
    • Canada

    #2
    Re: Home Automation Controller (AKA: a Rebranded Industrial Machine)

    I found a few manuals here https://www.manualslib.com/brand/tek...ial-computers/

    looks like its a Kontron PCI-946 board
    Attached Files
    Last edited by R_J; 03-25-2017, 05:23 PM.

    Comment

    • pentium
      Badcaps Legend
      • Mar 2006
      • 2778
      • Canada

      #3
      Re: Home Automation Controller (AKA: a Rebranded Industrial Machine)

      The PCI-946 is indeed the same board but with the Adaptec SCSI chip also added. The product datasheet also confirms that the connectors I'm seeking are on the board somewhere but again, nobody has the installation manual which would actually SAY what each header does.
      Find Nedry!


      Check the Vending machines!!

      <----Computer says I need more beer.

      Comment

      • ratdude747
        Black Sheep
        • Nov 2008
        • 17136
        • USA

        #4
        Re: Home Automation Controller (AKA: a Rebranded Industrial Machine)

        I have a backplane to one of these at my parents' old house... never knew what it was for.

        If you want it, its yours for the cost of shipping (assuming it's still there).
        sigpic

        (Insert witty quote here)

        Comment

        • R_J
          Badcaps Legend
          • Jun 2012
          • 9535
          • Canada

          #5
          Re: Home Automation Controller (AKA: a Rebranded Industrial Machine)

          Install a hard drive and put an os on it

          Comment

          • goontron
            5000!
            • Dec 2011
            • 4108
            • US

            #6
            Re: Home Automation Controller (AKA: a Rebranded Industrial Machine)

            Goddamn i hate PhotoPhucket! 504's galore. The number of 307's is annoying as well.....
            Things I've fixed: anything from semis to crappy Chinese $2 radios, and now an IoT Dildo....

            "Dude, this is Wyoming, i hopped on and sent 'er. No fucking around." -- Me

            Excuse me while i do something dangerous


            You must have a sad, sad boring life if you hate on people harmlessly enjoying life with an animal costume.

            Sometimes you need to break shit to fix it.... Thats why my lawnmower doesn't have a deadman switch or engine brake anymore

            Follow the white rabbit.

            Comment

            • pentium
              Badcaps Legend
              • Mar 2006
              • 2778
              • Canada

              #7
              Re: Home Automation Controller (AKA: a Rebranded Industrial Machine)

              Originally posted by R_J
              Install a hard drive and put an os on it
              I gave it a 4gb Compact Flash card and threw Windows 98 on it. First thing I can say is:

              -The multiport card does not have DOS or Windows drivers, or at least if there are they are not that easy to find.
              -The video card locks the machine once you load Nvidia's drivers. Older drivers don't change much.

              I really wish I knew that the hell OS this ran that supposedly supported such a modern graphics card and also a multiport card that according to Google was marketed as a Unix console card during the PC AT and PS/2 days.
              Find Nedry!


              Check the Vending machines!!

              <----Computer says I need more beer.

              Comment

              • goontron
                5000!
                • Dec 2011
                • 4108
                • US

                #8
                Re: Home Automation Controller (AKA: a Rebranded Industrial Machine)

                Originally posted by pentium
                I gave it a 4gb Compact Flash card and threw Windows 98 on it. First thing I can say is:

                -The multiport card does not have DOS or Windows drivers, or at least if there are they are not that easy to find.
                -The video card locks the machine once you load Nvidia's drivers. Older drivers don't change much.

                I really wish I knew that the hell OS this ran that supposedly supported such a modern graphics card and also a multiport card that according to Google was marketed as a Unix console card during the PC AT and PS/2 days.
                Early Linux?
                Things I've fixed: anything from semis to crappy Chinese $2 radios, and now an IoT Dildo....

                "Dude, this is Wyoming, i hopped on and sent 'er. No fucking around." -- Me

                Excuse me while i do something dangerous


                You must have a sad, sad boring life if you hate on people harmlessly enjoying life with an animal costume.

                Sometimes you need to break shit to fix it.... Thats why my lawnmower doesn't have a deadman switch or engine brake anymore

                Follow the white rabbit.

                Comment

                • ratdude747
                  Black Sheep
                  • Nov 2008
                  • 17136
                  • USA

                  #9
                  Re: Home Automation Controller (AKA: a Rebranded Industrial Machine)

                  Os/2?
                  sigpic

                  (Insert witty quote here)

                  Comment

                  Related Topics

                  Collapse

                  • Document Archive
                    ALIENWARE Steam Machine R2 i7-6700T Specification for Upgrade or Repair
                    by Document Archive
                    This specification for the ALIENWARE Steam Machine R2 can be useful for upgrading or repairing a desktop PC that is not working. As a community we are working through our specifications to add valuable data like the Steam Machine R2 boardview and Steam Machine R2 schematic. Our users have donated over 1 million documents which are being added to the site. This page will be updated soon with additional information. Alternatively you can request additional help from our users directly on the relevant badcaps forum. Please note that we offer no warranties that any specification, datasheet, or download...
                    09-12-2024, 03:28 PM
                  • CG2
                    Janome DC3050 Sewing Machine Pedal Resistance
                    by CG2
                    OK, this is a long shot. I got this sewing machine cheap because it's end of line, ex-display, and had no pedal. The genuine pedal costs £60, while Ebay knock-offs go for around £15. So I went for the knock-off, it doesn't work, and I'm not sure whether it's the pedal or the sewing machine that has the problem.

                    Now this is an electronic machine, unlike the old fashioned sort where the pedal was a big resistor in series with the power to the motor. Here, the pedal is just (I think) a variable resistor fed with a 5 volt supply, and limited to a current of 5 milliamps. Assuming that...
                    04-14-2023, 07:53 AM
                  • Soulzink
                    Samsug washing machine. Power supply DC41-00189a board issue
                    by Soulzink
                    Hi everyone,

                    I am trying to fix a samsung washinmachine power supply main board.
                    I already replaced it with another one to fix the machine but i want to try understand the issue with the old board.
                    Therefore i hope to be able to get some help to explain what to check in order to troubleshoot.
                    The power supply board reference is the following: DC41-00189a
                    I have followed one thread (https://www.badcaps.net/forum/troubl...ingmachine-rel...
                    04-19-2025, 06:26 AM
                  • unimatrix93
                    How to stabilize AC voltage to CNC machine
                    by unimatrix93
                    Hello there everybody, I'm not sure if it's the right topic to ask this but I hope so.


                    I have a CNC machine wired to 3-phase 230V AC.

                    It's a smaller CNC machine with a 3500W motor, do it does not uses much power.

                    The problem is, when the residents come home and put load on the network, the voltage can drop to around 207V which is fine for most household items but by CNC machine stops working from this.

                    I contacted the electricity company but they refuse to help me solve this problem.

                    So I started to look around for some DIY...
                    03-17-2025, 05:52 AM
                  • xdever
                    820-01700 not booting, 4V PP2V5_NAND_SSD0 but 2.5V when the machine is off.
                    by xdever
                    Hi all,

                    I got a 820-01700 of a friend that doesn't turn on. I read that a typical issue with these boards is the TPS62180 generating the NAND voltages, so this is where I started looking. Sure enough, PP2V5_NAND_SSD0 is 4V when the machine tries to turn on (I try to determine this by measuring PP2V5_NAND_SSD1, which is 2.5V as it should in this case. The PP0V9_SSD0 and PP1V8_SSD0 power supplies for the SSD are on at the same time when PP2V5_NAND_SSD0 is 4V). The extremely weird thing is that when the machine is off (PP2V5_NAND_SSD1=0, PP0V9_SSD0=0 and PP1V8_SSD0=0), PP2V5_NAND_SSD0...
                    01-15-2025, 08:44 PM
                  • Loading...
                  • No more items.
                  Working...