esr meters

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • MORPHOGEN
    Member
    • May 2014
    • 14
    • scotland

    #1

    esr meters

    Hi would you advise me on not buying an esr metere from ebay. Im not seeing many shops thst sell them in the uk does anyone in the uk know where i would get a real one from and a trusted shop seller.

    Also do i need any other kinds of meters too check my motherboard for shorts etc .

    Thanks in advance im just a beginner but would like too learn.
    You can only get better by playing a better opponent. Teach me.
  • trebo
    Badcaps Veteran
    • Feb 2010
    • 514
    • Wales, UK

    #2
    Re: esr meters

    I bought my ESR meter from Maplin they have stores all over UK
    its a Peak Atlas esr60, they can be upgraded to the newer version for a price by the manufacturer, it reads Capacitance as well
    a good Digital multi meter is priority, but its best others recommend what one, good ones come at a cost

    Comment

    • JJR
      Senior Member
      • Mar 2013
      • 171
      • UK

      #3
      Re: esr meters

      I bought this model last year, used it a few times, works ok.

      http://www.ebay.co.uk/itm/new-Capaci...item4acd010b5b

      Comment

      • MORPHOGEN
        Member
        • May 2014
        • 14
        • scotland

        #4
        Re: esr meters

        Yeah thanks. I seen some on ebay but looked like foreign junk home made fakes. Ill check out the maplin store.
        You can only get better by playing a better opponent. Teach me.

        Comment

        • MORPHOGEN
          Member
          • May 2014
          • 14
          • scotland

          #5
          Re: esr meters

          Yeah i seen those jjr i wasnt sure on the quality thanks for the reply.

          I think i posted this in the wrong section immsorry.
          Last edited by MORPHOGEN; 05-21-2014, 04:59 AM.
          You can only get better by playing a better opponent. Teach me.

          Comment

          • budm
            Badcaps Legend
            • Feb 2010
            • 40746
            • USA

            #6
            Re: esr meters

            I bought version 1 may be 2 years ago for the tech to use, just bought v2 last month.
            https://www.badcaps.net/forum/showth...888#post443888
            Never stop learning
            Basic LCD TV and Monitor troubleshooting guides.
            http://www.badcaps.net/forum/showthr...956#post305956

            Voltage Regulator (LDO) testing:
            http://www.badcaps.net/forum/showthr...999#post300999

            Inverter testing using old CFL:
            http://www.badcaps.net/forum/showthr...er+testing+cfl

            Tear down pictures : Hit the ">" Show Albums and stories" on the left side
            http://s807.photobucket.com/user/budm/library/

            TV Factory reset codes listing:
            http://www.badcaps.net/forum/showthread.php?t=24809

            Comment

            • stj
              Great Sage 齊天大聖
              • Dec 2009
              • 30919
              • Albion

              #7
              Re: esr meters

              hey, what happened to the russian guy selling the dual-display esr+uf unit?

              Comment

              Related Topics

              Collapse

              • Mess
                Beginner question. Did I find a short?? HP dax31mb1aa0 REV A motherboard
                by Mess

                Hi beginner here, so I'm not sure of I've done this right 😅 trying to diagnose my laptop's motherboard (dax31mb1aa0 rev a). I don't quite know how to read the schematic, so I'm attaching the pictures of the motherboard and the measurements.

                I was attempting to measure resistance to GND on inductors. I disconnected motherboard and used "continuity testing" setting on my multimeter. I put black probe to Ground & red probe on an inductor. Did I measure this right? Am I correct to think that 0.3 ohm measurement indicates a short circuit? Thank you for your help!...
                09-15-2024, 09:56 AM
              • howardc64
                Where do repair shops buy MB replacement batteries?
                by howardc64
                Order my parts from mobilesentrix.com and iPhone batteries have been excellent. Recently got 3x bad A1534 (2015) batteries. All would work until ~30-40+% and drop to < 10% instantly. Typical sign of cheap batteries.

                Perhaps the less popular A1534 model's aftermarket batteries are more source limited. Just find it surprising quality from mobilesentrix (usually fairly high quality aftermarket parts) have been so poor.

                BTW, this isn't the only defective parts I've had from mobilesentrix. Amongst others including iPad Air touch screen and A1989 touch bar (display was...
                07-25-2024, 10:42 AM
              • dbuergi
                MacBook Pro A2338 liquid damage repair for a beginner?
                by dbuergi
                Hi all,

                i have a A2338 with water damage on the logic board. Cleaning it showed some heavier corrosion around U7000 and surrounding caps. Some are totally broke.
                I get 5,2v when using both USB-C Ports but until now i didn't make any more tests.
                Since i'm a beginner i want to know next possible steps. I'm not afraid replacing the intersil 9240hi but the other parts with 1mm or 2mm scare me and i don't know where to get replacements.
                I fixed other laptops but this ist my first apple device ....
                07-24-2024, 09:48 AM
              • Bladiblad
                HP RTX 3060 with bad cap (beginner project)
                by Bladiblad
                I have an interesting project here. I have a HP RTX 3060 12GB VRAM GPU with a shortcircuit between a (what I believe is) a coil and a cap. The short circuit is so bad that it will trigger a failsafe on the PSU.

                I'm a beginner in this field and have managed to do only very simple board repairs so far. I have basic understanding of the components (mosfets, caps, nand chips) but completely diagnosing a board with schematics would be challenging. In this case though, I'm going to hope that replacing only the two shorted components will bring the card back to life (if none of the IC's...
                06-14-2024, 06:42 AM
              • CanukTuk
                Beginner Tutorial for using RCUnlocker to remove BIOS password?
                by CanukTuk
                Hello,
                Kinda new to this, so hoping you will all give me a bit of a pass.
                I came to this forum because need to remove the BIOS password on an HP EliteBook 850 G1.
                I understand that I need to dumpt the BIOS to a dump file, process the dump file with RCUnlocker, then write the modified BIN file back to tthe BIOS chip.
                Is there a beginner guide anywhere that describes the entire process for doing this?
                I am reallly in the dark regarding which tool or tools are required to extract the BIOS dump file, then write the modified BIN back to the BIOS chip. The guides I have...
                03-24-2024, 02:54 PM
              • Loading...
              • No more items.
              Working...