I wonder why this RAM module failed

Collapse
X
Collapse
 
  • Page of 2
  • Time
  • Show
Clear All
new posts
Previous 1 2 template Next
  • mariushm
    Badcaps Legend
    • May 2011
    • 3799
    #21
    Re: I wonder why this RAM module failed

    eBay is your friend.

    A few weeks ago, I've sold about 20 512 MB ddr1 sticks for about 5-8$ a piece if I remember correctly.

    I can buy 512MB ddr1 sticks at a local store for about 14$. 1 GB DDR1 with ECC sticks are more expensive at around 35$ at this store.

      Comment

      • cheapie
        null
        • Jul 2010
        • 849
        • USA
        #22
        Re: I wonder why this RAM module failed

        Maybe I could ask around and see if anybody has some partially defective sticks.

          Comment

          Previous 1 2 template Next

          Related Topics

          Collapse
          • AlexVG
            Replacing the WiFi module on a vacuum cleaner iROBOT i7
            by AlexVG
            Hi,
            I have had an iROBOT i7 with a camera error (error 68) version REV M, year 2018.

            I bought a liquid damaged Mainboard with WiFi module, from the same vacuum cleaner, but a different year and a different version (REV G).
            (This board does not respond, only the LEDs light up in a circle.
            The liquid damage is catastrophic and restoration is impractical).
            (I bought this board to get the WiFi module and camera).

            The boards are completely different in the installation of elements, even the connector for the WiFi module is different.

            If...
            10-22-2024, 07:20 AM
          • repair-it
            TOSHIBA DLP 52HM95 How to reset timer module on bulb
            by repair-it
            I replaced the bulb only on my Toshiba DLP The bulb is a TB-25. This is the first time I've done a bulb only replacement. Supposedly there is a timer module that needs to be re-calibrated or reset. I don't know where the module is located. I see some vendors selling the bulb with the housing stating module included which leads me to think the module is located inside the enclosure the bulb mounts in, but I didn't see it. Maybe it's inside the plug attached to the bulb?

            Anyway - I am seeking information on how to reset this so called module so that the lamp will operate. Apparently...
            10-11-2023, 07:18 PM
          • sam_sam_sam
            Light that has a bug zapper in bottom section of light fixture the LED light module took a crap but the zapper still works
            by sam_sam_sam
            So I got the bright idea to remove the LED light module from the fixture and put it on top of another enclosure and keep using the zapper

            The removal of light module was a successful and now I just have to cut a hole in the enclosure and put a power cord that has an on and off switch on it

            You are lucky to get about two years of service out of one before the LED module starts flicking and just stops working because it is mounted on an aluminum plate and these are hard to solder on it and it is not worth messing around with them and especially this one because it has line...
            09-07-2024, 07:26 PM
          • r3vsEngIT
            ALPS Electric BT/WLAN Combo Module Experiment
            by r3vsEngIT
            i have a 2017 volvo that i upgraded the stereo in but the week link now is the SBC codec the head unit uses to transmit audio. i took the unit apart and we have a UGKZ2 combo module with a CSR8311 bt chip. after some research it is my understanding that ALPS made another combo module that used the CSR8350 chip. this chip is capable of aptx. https://vehicle-electronics.biz/cont...s-alps-modules

            my question is, would it be possible to swap out this UGX module as plug n play? what about replacing the CSR chip itself? any idea where to get either?

            ...
            03-06-2025, 11:11 AM
          • Document Archive
            V216B1-L04 TFT-LCD Module Datasheet
            by Document Archive
            The V216B1-L04 model is a 21.6 inch wide TFT-LCD module with a 4-CCFL Backlight Unit and a 30-pin 1ch-LVDS interface. This module supports 1366 x 768 (16:9 wide screen) mode and displays up to 16.7 ( 6-bit+Hi-FRC colors) millions colors. The inverter module for the Backlight Unit is not built in.

            FEATURES
            - Excellent Brightness: 400nits
            - Contrast Ratio: 800:1
            - Fast Response Time: 5ms
            - Color Saturation: NTSC 72%
            - WXGA (1366 x 768 pixels) Resolution
            - DE (Data Enable) Only Mode
            - LVDS (Low Voltage Differential Signaling) Interface
            ...
            10-11-2024, 09:23 AM
          • Loading...
          • No more items.
          Working...