I have been reading so much information about ele caps and think my brain is on overload/shut down mode. LoL My main concern is that I do not want to alter the amplifier specifications in any manner that will adversely effect their circuitry and operation.
I am going to be replacing a lot of electrolytic caps (~250) and could use a little clarification on the more technical parameters.
(Low IMP, Long Life) Needs to be <= Orig IMP? While Ripple Current needs to be >= Orig values?
What if ESR isn't given by the manu?? Where do I go from there?
(General Purpose ELE caps) basically new caps have to be >= V/uF and Ripple Current is >= Orig?
I am going to be replacing a lot of electrolytic caps (~250) and could use a little clarification on the more technical parameters.
(Low IMP, Long Life) Needs to be <= Orig IMP? While Ripple Current needs to be >= Orig values?
What if ESR isn't given by the manu?? Where do I go from there?
(General Purpose ELE caps) basically new caps have to be >= V/uF and Ripple Current is >= Orig?
Comment