New Members - please post your introductions here
Collapse
This is a sticky topic.
X
X
-
Re: New Members - please post your introductions here
Hi;
My name is Tomas Roussy and I live in Canada, I am an very old guy, I started in computing when the machines works with lamps named Flip-Flop because they were on/off only to mimics today computers, the programing was done on a punched tape (7 data holes and one small for guide)
From there I worked putting together computers on that old S100 boards (I guess nobody of the actual computer generation knows what I am talking about) with TurboDos as operating system. I cover computers programing from the Assembly beginnings going through Basics, etc. with full accounting software system implementations.
To cut it short, I still have the stamina to learn always something new and still I do some reparations and installations but mostly PHP programing with MySQL
I like to check this forum for ideas, especially for the Raspberry pi 2 latest model.
Thank you for allowing me to introduce myself.Comment
-
Re: New Members - please post your introductions here
Hey, Chris from VT usa here. novice to tv repairs. great understanding of current. play with low to high voltage, schematics, industrial electronic, ac/dc.(for work)
fixed 2 of 3 T'V's since I started. want to continue knowledge. working on tvs I always end up reading back on badcaps so I thought Id sign up.
thanks in advance
CHrISComment
-
Re: New Members - please post your introductions here
Greetings from southern California. I'm here to learn more about replacing parts on my TV to keep it running.Comment
-
Re: New Members - please post your introductions here
Hello I'm Michael
Great to find a place i can share my findings and knowledge, share ideas and help fix almost anything.
I work on Tvs, laptops, desktops and just about anything i find interesting.Comment
-
Re: New Members - please post your introductions here
Hey all, thanks to some information I found here and to ModusLink PTS, I was recently able to fix my Panasonic TC-P50G15 plasma. So I'm going through the hoops here to register completely so I could post my experience and hopefully "give back" to the community.Comment
-
Re: New Members - please post your introductions here
Hello everyone, i am Remi, from France (sorry for my poor English^^)!
I like DIY and electronic repair.
I already fixed many devices such as laptop computers, synths, digital audio mixers, audio interfaces, and many more... Also made several DIY projects (my favourite is the Shruhi-1 from Mutable Instruments).Comment
-
Re: New Members - please post your introductions here
Hello Everyone!Looking forward to interact with you on this forum....
Comment
-
Re: New Members - please post your introductions here
Hiya everyone,
my name is sam,
Im 23 years old,
Im in the building trade..
Completely new to eletrics.
But i like two learn diffrent things
So thought id come invade and do some
Learning lol.
If you would like to no
anything else then please
message me .. thanksComment
-
-
Re: New Members - please post your introductions here
Hello from the netherlands,
I'm wouter and like to repair, tweak and make the best out of a bad situation.
Most of the times i rapair laptops, pc and notebooks.
Hope we van learn from each other here...
More people less work!!
regards,
wouterComment
-
Re: New Members - please post your introductions here
hello from Boston
been having trouble with my 2012 panasonic p50gt50...replaced the main board a couple times, now I'm getting new power....been reading a wealth of information, hopefully I can fix this sooner than later!Comment
-
Re: New Members - please post your introductions here
I just picked up a LG 47LC7DF it doest have a picture and I haven't hooked it up to test sound. When I plug it in the power light is Red when I click the power button it blinks red and green stays black no picture.Comment
Related Topics
Collapse
-
by fredyjbiplease help friends thinkpad T470 board CT470 series NM-A931 error post "bottom cover tamper detection error"
I've already
flashed the bios clean me and updated from the Lenovo site, then removed the switch and immediately jumped the S3 from pins 1 to 4, 2 to 3 but the problem remained the same, thank you1 Photo -
by fredyjbiplease help friends, I have 3 T490 units with the same case, the USB type C is completely dead, showing 20v 0 amp, loss of voltage VINT20_IN resistance to ground is fine, thank you
I think the problem is that I lost the voltage at PQ0008 pon 1 -PWRSHUTDOWN which should have been high which was picked up by R9512 VCC3SW, thank you very much for your help
PF0002 20v
PQ0005
pin 5 20v
pin 1.2.3 19.8v
pin 4 19.8
resistance
source & drain 2,4 m
source & gate 100k
PQ0006
pin 1.2.3 19.8v
pin 4 19.8v... -
by fredyjbiplease help friends x1 yoga 7th no display beep melody thank you...
-
Channel: BIOS Requests ONLY!
-
-
by fredyjbiplease help friends clean me bios x1 yoga 7th no display melody beep, thank you
-
Channel: BIOS Requests ONLY!
-
-
by fredyjbiPlease help friends, thinkpad t480 nm-b501 is dead, help me fix it, thank you
usb meter 20v 0.00 amp, after I took the VSYS measurement the drop was only `9.2v which should have been 10.2v I measured from a normal matherboard machine, the VSYS path resistance to ground diode mode is 1900 thank you
LINK to Schematic -> https://www.badcaps.net/forum/troubl...b501-schematic - Loading...
- No more items.
Comment