tram704
Member
Last Activity: 01-21-2016, 05:13 PM
Joined: 08-24-2015
Location: Lincolnton, NC
-
LF461EM4 Emerson
Trying to repair my dad's tv. When I turn unit on, screen will appear showing emerson, then tv shuts off immediately and I can hear a pop coming from speaker each time it shuts off. Tried turning on 5 to 6 times and same thing happened every time. I searched forums and saw another post with same issue but no resolve. Thanks for any help. -
Re: Sanyo DP42840
Here is pic of model and serial #'s if this helps anyone.
Thanks... -
Sanyo DP42840
Someone is selling this tv. They say they have problems with screen. I have attached picture they sent me. Would this be a board issue? If so, what would be a ballpark price for a new board?
Thanks... -
Re: Panasonic (TC-P55ST30) No power
"A" Board fixed my problem. Thanks for the assistance.Leave a comment:
-
Viewsonic N2635w cap. question
Viewsonic N2635w mod. VS11769-1M
I have a few noticeable bad caps. I can tell voltage and uf on all but the one in the picture(white ink pin pointing to it). I know I can order kits or individual bbut want to make sure I get the one in question correct size. This cap is sitting in CS19 on board. Can anyone tell me correct cap size. Thanks... -
Re: Panasonic (TC-P55ST30) No power
Thanks guys. Ordered board will let you know! Thanks againLeave a comment:
-
Re: Panasonic (TC-P55ST30) No power
Should I read 5vac or 5vdc? Sorry, for junior league question. I do have 5v dc. I moved to next step which was to disconnect a1 on a board and listen for relay click. Did this no click. Therefore replace a board. Just want to make sure about the ac/dc reading.Leave a comment:
-
Re: Panasonic (TC-P55ST30) No power
Not sure if this is what you were looking for but here are some pics. If not let me know and I will get some more. Thanks...Leave a comment:
-
Panasonic (TC-P55ST30) No power
I have a Panasonic TC-P55ST30 that will not power on. I have no Flashing LED lights. Actually, I have no LED lights at all. I tried the unplug, hold power 10sec, then plug in again. No change. Removed back cover, No boards where grounded to case. Also, I have 120v entering main board. This is where I stopped. Any help on further troubleshooting would be appreciated.
Thanks -
Re: New Members - please post your introductions here
Hey all,
My name is Ted, Having trouble with Panasonic TV. Found this site during my internet searching, so decided to give this a try.Leave a comment:
No activity results to display
Leave a comment: