New Members - please post your introductions here

[HiDesertRat]

Re: New Members - please post your introductions here

Hello all. I am a retired Marine, with over 15 years working on radars, and 5 years on computers. I consider myself a above average technician when it comes to most things electrical. I enjoy fixing "stuff". Doesn't really matter what it is, if it is broke I will look at it. It will either get fixed or it will still be broke, but I will have learned something. Sometimes, that is not to touch that item again! I like to, at least, try to fix it, before just throwing it out and getting a new one; doesn't matter what "it" is.
Looking forward to learning and helping here on this forum.

[biohazard326]

Re: New Members - please post your introductions here

Hi, newbie here. Trying to figure out why my monitor died on me. Figured I would come here seeing that there is a fair amount of info about my Hanns G monitor

[urbis]

Re: New Members - please post your introductions here

So... I'm from the UK and an electronics hobbyist.

Not much more to say?

[mustafaaaa]

Re: New Members - please post your introductions here

hello

[lachlanritchie]

Re: New Members - please post your introductions here

hello

[gobby009]

Re: New Members - please post your introductions here

just starting to dabble in eletronics basicly to save money on repairs im hoping the knowledge of the people on here will stear me in the right direction for future repairs.

[traynorsom]

Re: New Members - please post your introductions here

Hi,

I would like to repair a TV and Badcaps looks like a great source of information and guidance.

Cheers!

[rookieme]

Re: New Members - please post your introductions here

Hi to all,
I joined the forum in order to learn finding electronic components problems.
For me I can say that I'm experienced at reballing.

[dadwillfixit]

Re: New Members - please post your introductions here

Hi Badcaps,
I am a jack of all trades and the master of none! I have some tv repairs that are more than just bad solder joints.

[zair]

Re: New Members - please post your introductions here

This site has a wealth of information. Thanks to all those sharing their experiences and hope i can contribute too.

[ivica]

Re: New Members - please post your introductions here

A WELCOME to everyone that joins in!!

Peta,

Anyhow,
Peta, and everyone else that has joined, Welcome to the forums!! Bring some friends with ya!! :roll:

Hello,
or say hello....
ivica

[swharper]

Re: New Members - please post your introductions here

Hi I started out working on washtub disk drives with 9 platters and 18 heads
That were a whooping 300 MB not GB, I am here because my 50" Panasonic plasma
Lost power yesterday, looks like this is a great source of info. I am a tinkerer also
And like to work with Raspberry pi and arduino projects that meld agriculture
And technology and IoT

[Maxp]

Re: New Members - please post your introductions here

Hello,
I am tryin to repair a SONY TV kdl40ex521,
it has standby power 3,3V in mother board.
It turn on,sony logo on screen, then turn off, then turn on, sony logo on screen...
any help! .
....

[bdawg]

Re: New Members - please post your introductions here

Well ok, here I am. I'm Brian! I'm a PC repair technician for PC's and Macs. Basically just want to see what info I can scour from this forum I'm actually looking for a schematic for Macbook Pro logic boards. Part # 820-2915-B at the moment. If anyone has one please post. Thank you very much!!

[TecPham]

Re: Hi comunity

Hi i have a problem with Toshiba TV model 46rv535u with the clinking problem somebody know what components to replace in the power supply...???

[charles frost]

Re: New Members - please post your introductions here

I already put a review on but I guess it was not right. I am a tech of about45 yrs and liked looking on this web site. There is a lot of good info here. I will help out when I can. As for business these days it is like thanks to you tube and the throw away society.

[cyberbug]

Re: New Members - please post your introductions here

Hi,

i'm a bit of a noob in electronic's

got here on my quest to fix my HG281D if it completely breaks down. (First i need a new monitor, cause i'm probably gonna screw up)

i work in IT and like almost everything technological end scientific.

[dead66]

Re: New Members - please post your introductions here

Hi there, started tinkering with electronics repairs a few years ago. Started on small digital cameras and camcorders, then laptops and PDAs. I'm just learning about t.v.s now, so this looks like a great site to learn from.

[chonero]

Re: New Members - please post your introductions here

I am primarily from Ecuador , I have like 25 in computer science and have always tried to learn more and I'll be electronica thanks for help.

[Clever Jake]

Re: New Members - please post your introductions here

Hello all, I've signed up to this forum, so I can (hopefully) fix some of the computers for my employer!