Re: Samsung UE32ES6100 Blinking led.
1st check for solder connections on power board. Check board connectors, then check electrolytic caps on power board then proceed to second phase of elimination.
charles frost
FROSTY
Last Activity: 01-12-2017, 03:41 PM
Joined: 03-07-2014
Location: Pine Bush New York
-
Re: New Members - please post your introductions here
I hope I finally have this right. I just want 2 help when I canLeave a comment:
-
Re: New Members - please post your introductions here
y DO i KEEP GETTING e MAIL 2 post my introduction here? I thought I did that months ago
Leave a comment:
-
Re: LG Plasma - Thin horizontal line flicker and mirror image
Looks like Y sus problem or screen. What kind of lines ? Non color could be y sus freq some times can be heard. Try the freeze checkLeave a comment:
-
Re: New Members - please post your introductions here
I already put a review on but I guess it was not right. I am a tech of about45 yrs and liked looking on this web site. There is a lot of good info here. I will help out when I can. As for business these days it is like thanks to you tube and the throw away society.
Leave a comment:
-
Re: New Members - please post your introductions here
Hi I am trying to post for a while. Hope this is it. Nick name FROSTY, FIXING HOME ELECTRONICS FOR A FEW YRS. USE THIS SITE A LOT. Hope I can help out on some issuesLeave a comment:
-
Re: Panasonic 37PX8EA 1 Blink error
Try unplugging Y and z sus. boards then turn on set. This could eliminate 1/2 your problem,Leave a comment:
-
Re: Samsung Plasma -- PN64D7000 Intermittent black line across screen
You changed the Y sus did you adj the corresponding voltages on the Y board ? there 2 small pots you have to adj the B+ that is shown on the frame inside tv. Wrong voltages could give you that look. Not the black line. Maybe a buffer is bad or, god forbid, a ribbon to screen is bad.Leave a comment:
-
charlie
JUST TRYING TO FIGURE OUT FORUM INTRODUCTION. Keep getting E mail post forum. Hope this is right -
Re: New Members - please post your introductions here
Hi Just an old tech hanging around for new ideas. Found out that ,thanks, to the new means of U tube ,the tech putting repair tips out there has really effected buisnes. Most people go on line to repair their tvs or throw them away. Has any one seen their volume drop? I feel like a dinosoreLeave a comment:
-
charles frost
I am an old tech. hoping to maybe give some insight in the repair world. I am limited to home electronics but not much on computers. I sure am not going to qualifie by putting the # of units I repaired because over the span of 52 yrs I lost count.I have kept up with modern electronics and enjoy the tech. forum of repair insite. FROSTY
...
Leave a comment:
-
Re: New Members - please post your introductions here
new member . Hope can contribute in the help section. No computer knowledge to think of. We did not have computers in my day . Just tried to keep abrest of the modern electronics world. FROSTYLeave a comment:
-
Re: New Members - please post your introductions here
Hi I am CHARLIE been a CET since 1961. On here to help out if I can. Also have need for answers on the modern LCD, PLASMA and LED. i HAVE STUDIED MUCH But some new tech. solutions can help also. I have found out the need for the old type service tech is obsleet. If you can change boards you have it made.Leave a comment:
-
Re: New Members - please post your introductions here
I am a new member, enjoy the scope of most of the electronic informatoion, and would like to help at times with my limited knowledge of the last 40 yrs.Leave a comment:
-
Re: LG 42PC1RV - Powers up, sound ok but no picture
Yea bud bad Y sus. Be advised there could be bad buffers also. Not all the time. At least check buffers, top and bottom for any burned ICs or small holes in them.Leave a comment:
-
Re: Sharp LC-60LE835 vertical lines
After viewing your pix I would lean towards a bad screen. Being that the loaded source drive data lines you see here are of all 3 color gender, not a red all, not a green all or just 2 color mix , leads me away from a T con. I could be wrong.Leave a comment:
-
Re: New Members - please post your introductions here
I am a CET with an old AAD in ELECTRONICS FROM A COLLEGE. I SAY OLD BECAUSE ELECTRONICS HAS PROGRESSED , over the last 40 yrs, to a place where I say enough done all the learning I need. I retired from SEARS Service after 20, had no choice, and continued my own buisness. So here I am . Willing to assist if I can and still looking for more knowledgeLeave a comment:
-
charlie frost FROSTY
...
Leave a comment:
No activity results to display
Leave a comment: