SAMSUNG UE55MU6405 - no standby

[lotas]

Re: SAMSUNG UE55MU6405 - no standby

RT809H cannot work properly with (BB) Nand (model D5500, D5700 series)

[yoritomo]

Re: SAMSUNG UE55MU6405 - no standby

Which device do you recommend then ? Or may it exists an alternative software or patch for it ?

[lotas]

Re: SAMSUNG UE55MU6405 - no standby

For such cases, you need a cleaned one without (BB) and with corrected ECC Dump.
Or prepare Dump for a certain Nand (knowing it (BB))
Old, native better quality Nand chips than those sold in China.

[lotas]

Re: SAMSUNG UE55MU6405 - no standby

Which device do you recommend then ? Or may it exists an alternative software or patch for it ?

If anything, then I can prepare a correct dump for you under native Nand, I only need addresses (BB) on your Nand after erasing the chip.

[Henke]

Re: SAMSUNG UE55MU6405 - no standby

This is interesting. I had a samsung with similar problem. But i had standby light, dark screen until i disconnected the cable between ps and mb, then the backlight lit up. I fixed a new mb from eBay (BN41-01990A) it's an hotel-tv. that fixed the problem. But do you guys mean that i could fixed it with new firmware?

[spyke11]

Re: SAMSUNG UE55MU6405 - no standby

Hi,
I have the same problem.
can you help me please ?

[lotas]

Re: SAMSUNG UE55MU6405 - no standby

Hi,
I have the same problem.
can you help me please ?

What kind of problem is this?
Your dump ic1604 is working.

[spyke11]

Re: SAMSUNG UE55MU6405 - no standby

What kind of problem is this?
Your dump ic1604 is working.

Hi,
The red light and the backlight flashing (dimming) every 5 seconds, no picture.

[lotas]

Re: SAMSUNG UE55MU6405 - no standby

Hi,
The red light and the backlight flashing (dimming) every 5 seconds, no picture.

So maybe the problem is in the panel itself, disconnect the cable between the motherboard and the panel and turn on the TV and see if it behaves the same way.