Jmenuu Zavalichi
Member
Last Activity: 04-11-2025, 07:31 AM
Joined: 06-02-2024
Location: vinaros
-
Hi, I have a PlayStation 4 that won't start... and when it started, it couldn't be updated... My question is... If I copy the 25q40 dump and send it to you, could you repair it? I don't know if it's the culprit, but I'll try. -
Hy there ..y will send you the dump 25q80(display)from my tv samsung and try to replace yours(dont forget save your original dump yo restore it if you dont have succes)because is the same tvLeave a comment:
-
I didn't have to enter anything in registration...it was done automaticallyLeave a comment:
-
MAN....YOU ARE THE GOD.....its works perfectly.....the original main tx very much...y will recomend youLeave a comment:
-
Sorry for asking jejje...what y need to do to write status registers after recording the dumpLeave a comment:
-
Now it seems that copying dump from 25Q80 (original main) to the new main does not work for me, but if I could find the original dump or you could modify the dump from 25q40 (non-standby) of the original board I could possibly recover itLeave a comment:
-
I copy the dump of the original 25Q80 to the new main... but nothing is seen, only the LEDs light up... I put the original dump back to the new main and I see the screen the same as before... I mean the programmer works well for meLeave a comment:
-
and from the 25q80 is this one...Leave a comment:
-
i have 2 this one and the last one...Leave a comment:
-
hy there...theat was the dumb i think...from the iriginal main (512kb)...try this....its the same i think...Leave a comment:
-
Hello friend...I finally managed to extract the bin file of the 25Q40 ic from the original motherboard that does not have standby (as you told me to send it to you to see if you can fix it) could you? I'll send it to you here...I'll try tomorrow to copy the file from the 25Q80 to the motherboard that I bought, let's see if it works for me (I remind you that I sent you some photos with the image of the TV that doesn't look complete, it's only 75% complete and distorted colors) thank you and I'm waiting for answers, let's see if could you modify the bin file
[ATTACH=JSON]{"data-align...Leave a comment:
-
Hello friend, have you found out something?...what could I do...I asked for a clip to hook the IC properly yesterday I did a little research and lowered the speed of the ezp2019+ programmer and it read but I think it's not complete tx I'll tell youLeave a comment:
-
I don't know what the programmer could be, it connects perfectly but any chip that reads tells me that it is empty
[ATTACH=JSON]{"data-align":"none","data-size":"full","title":"dataurl597248.png","data-attachmentid":3291375}[/ATTACH]...Leave a comment:
-
If you look at what we have talked about before, you told me to do that
[ATTACH=JSON]{"data-align":"none","data-size":"full","title":"dataurl477038.png","data-attachmentid":3291370}[/ATTACH]If you look at what we have talked about before, you told me to do that
[ATTACH=JSON]{"data-align":"none","data-size":"full","title":"dataurl477038.png","data-attachmentid":3291370}[/ATTACH]...Leave a comment:
-
I haven't been trying for days...with the tweezers (which are useless) with the ch341 programmer that burned...I bought a SOIC8 cable that didn't work for me...in the end I had to modify it...so that It matches the pins of the chip...it seems to connect...so it's fine...but I don't know what's wrong...the program I have or the Windows 11 that I have installed on the PC ...but I installed the drivers and it says the programmer is connected
[ATTACH=JSON]{"data-align":"none","data-size":"full","title":"dataurl679716.png","dat...Leave a comment:
-
el chip is this...can you help me?...
Leave a comment:
-
Hello friend...I'm trying to copy the chip...it detects it as epprom and tells me to put it in manually...any of them that I put in tells me that the chip is empty...it could be a problem of the program?...
Leave a comment:
-
from the original mainboard and if is dosnt work y will copy the file from ic1603(original mainboard) to ic1603(new board)Leave a comment:
-
Are you talking about the original mainboard? Very good...tomorrow when the programmer arrives I will try to copy the 25q40 software and send it to you.Leave a comment:
No activity results to display
Leave a comment: