Philips 55PUS6754 with lines after few seconds

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • marekk
    Member
    • Mar 2013
    • 36
    • UK
    #1

    Philips 55PUS6754 with lines after few seconds

    Hi,
    I have tried to replace TCON but it didn't help.
    The strange is that it shows Philips logo before the lines. Tried to cover some of the lines with tape on the ribbons to the screen but had no success.

    screen: tpt550u2-eqya3.g
    tcon: 6870C-0769A

    I will appreciate any help

    Many thanks

    Marek
    Attached Files
    Last edited by marekk; 11-03-2022, 03:03 PM.
    Tags: None
    • nomoresonys
      Badcaps Legend
      • Jan 2013
      • 12141
      • U.S.
      #2
      Re: Philips 55PUS6754 with lines after few seconds

      are you saying you replaced tcon and have the exact same display?

        Comment

        • marekk
          Member
          • Mar 2013
          • 36
          • UK
          #3
          Re: Philips 55PUS6754 with lines after few seconds

          Yes, I have replaced tcon and I got very similar lines after a few seconds

            Comment

            • Davi.p
              Hobbist Tech
              • Sep 2009
              • 4316
              • Italy - Milan
              #4
              Re: Philips 55PUS6754 with lines after few seconds

              replace original tcon, first, then make clear photos of main board, frc board eventually, no flash, direct sun light..

                Comment

                Previous template Next

                Related Topics

                Collapse
                • rtstorm
                  Philips 55PUS7303 LCD lines
                  by rtstorm
                  Hello, I have this 55" Philips TV that suddenly has these vertical lines on the LCD panel. I have checked the T-con board and I noticed some caps have 40Ohm I don't know if this is normal. These caps have 1.2V on them. I mark them on the photo with a silver pen. The T-con board has 1.2V, 12V, 25V, etc. Does anyone have any idea what could it be?
                  i try to disconect one ribon cable and the problem is the same, one side is white other side have the lines (the same is in other way)

                  T-con model: 55T32-C0L
                  Main Board: 715G8579-M0F-B01-005T
                  Model sticker
                  7 Photos
                  03-28-2024, 02:55 PM
                • alpersen
                  Philips 40 PUK6809/12 Backlight turns off after 10-20 seconds
                  by alpersen
                  Hello
                  Mother called and said TV turns off after switching on. So after turning on Philips logo shows and probably 10-20 seconds image disappears, sat receiver is connected and sound is heard from source. So I turned on my phones light and I can see the image it seems backlight was off after some time. I dis assembled the cover hoping to see a distinc cap blown or leakage. Here are photos I took (I was after 22:00 pm and maybe some of them are dark). Should I order and change caps on the power circuit or what would you recommend? Thanks...
                  07-25-2024, 12:50 AM
                • howardc64
                  TCL 55S425 few horizontal lines, potential failure on both side of panel/buffer board
                  by howardc64
                  All left and right refers to looking from rear of TV (or looking from front with TV upside down)
                  • TV came with vertical bars and no image. Found faulty TVS on left buffer board. Also replaced T-Con (may have damaged the original while hot air removing components, board has slight warp) and have full image but few horizontal lines on the screen. Some of the lines appears to be 2 pixel tall while others are 1 pixel tall.
                  • Disconnecting left and right buffer board potentially reveals problems on both sides with different signals (unless this T-Con require jumper like Samsung FB_TRDY1&3) Fault
                  ...
                  Yesterday, 05:17 PM
                • JJAAMM
                  SAMSUNG UN55KS9000F picture fades then distorts into vertical lines after 20 seconds
                  by JJAAMM
                  This was my main TV for the last 6 years. I'm not inclined to throw out a $2600 TV so quickly so I'm trying to investigate the issue.

                  Problem
                  TV was disconnected from power for 6 months during construction. When I plugged it yesterday picture was fine, after 30 seconds it dimmed then started developing horizontal lines, picture then starts to ghost vertically until it degrades into vertical streaks. TV always displays a perfect picture when cold. I can unplug TV for 5 minutes and plug it back in and picture is restored for 20 seconds. I can also keep it in standby mode...
                  07-06-2023, 06:01 AM
                • advant
                  Driving a Sharp TCON/panel with a universal main board
                  by advant
                  This thread is about trying to get an Universal Main Board to work with a Sharp TCON and panel.

                  I have a Sharp LC-46D85UN TV that has had a main board issue. Since this model is from 2009, I am not able to find an exact replacement of the main board. Instead, I decided to see if I can future proof this tv by getting a Universal Main Board (T53U21.2) from China to work with the Sharp TCON (CPWBX4291TPZA) and panel. The universal main board supports a 8 bit dual channel LVDS interface whereas the TCON requires a 10 bit dual channel LVDS input. I have modded the LVDS connector to match...
                  02-03-2020, 12:25 AM
                • Loading...
                • No more items.
                Working...