UE46ES6100 and UE55ES6100 MainBoard Compatibility

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • alltvrepairs
    Badcaps Veteran
    • Jan 2014
    • 217
    • Malta
    #1

    UE46ES6100 and UE55ES6100 MainBoard Compatibility

    HI,
    I am after a replacement board for U46ES6100 BN94-05898A . I came across one for UE55ES6100 BN94-05678Z looks identical including the LVDS connector.
    Anyone been here?
    Tags: None
    • nomoresonys
      Badcaps Legend
      • Jan 2013
      • 12098
      • U.S.
      #2
      Re: UE46ES6100 and UE55ES6100 MainBoard Compatibility

      if you left out the E in U46ES6100, so if it should read UE46ES6100, then It should work.

        Comment

        Previous template Next

        Related Topics

        Collapse
        • stylishconsultant
          un60j620dafxza - Samsung No Display Problem
          by stylishconsultant
          Hi All,

          Need help.

          I have a samsung un60j620dafxza led tv. When I plug it in it has no display, no sounds, and no standby lights.

          So I opened the tv and disconnected the power to the mainboard and the backlight powered up. This according to many people says that this is a mainboard
          problem. I checked the voltage coming from the stb and I read 1.3 volts on pins 1,3,5 and 7 which are low volts instead of 13 volts which i think the lcd panel
          might be drawing too much power from the power supply that it prevents the right voltage going to the mainboard....
          09-04-2024, 03:26 AM
        • orcic
          MASTER TL240 and new mainboard LW36BKC01
          by orcic
          Hello,
          I have an old MASTER TL-240 LED TV. Since it stopped working and it had a DVB-T receiver that is being dismissed in Italy, I've decided to replace the mainboard with a DVB-T2 one.
          The original problem was that when switching on the TV, the power LED was transitioning from red to steady blue, without showing video or audio.
          After checking some voltages on the power supply board (HKL-240101-B Rev. 1.4, HKL from now on) someone suggested me to replace the mainboard.
          Now I have some doubts about how to connect the new mainboard to the old power supply.
          First of...
          05-12-2023, 08:10 AM
        • NolesFan
          Samsung un82ru88000f - Boot loop sort of but can correct with taping of LVDS ribbon
          by NolesFan
          Hello all... TV started boot looping. Opened the back panel and tried to isolate the problem. Just PSB no boot loop. PSB and MB no boot loop. Plug in the LVDS from panel to MB and boot looping starts up. It doesnt matter of order that I plug the LVDS ribbons back in, only 1 and no boot loop but as soon as 2nd one plugs in boot looping. I then noticed a flicker on the screen when I was closing the clip on the harness to the LVDS. Shut the lights off so I can see better, and I noticed as i slowly close it, I will get a picture, but as soon as it clips in, I lose picture and booting happens. So I...
          2 Photos
          10-24-2024, 06:36 PM
        • Tommes
          Telefunken D43F287N4CWII - Vestel 17MB110S - Recovery Firmware
          by Tommes
          Hey Folks,

          I'm searching for a Full Flash Recovery Software
          for my Telefunken D43F287N4CWII

          Mainboard Vestel 17MB110S
          Panel: VES430UNDB-2D-N12
          Productcode: 10119394

          Does anyone know, where I can get it ?
          Or is it possible, to extract it from a working mainboard ?

          The Support Telefunken/Vestel GER couldn't help me.
          The Vestel TR Support didn't answer my email.

          History:
          The main problem with my Telefunken D43F287N4CWII was,
          it just goes out after a while, sometimes after a...
          01-04-2022, 09:56 AM
        • korn88
          Dead LG OLED55BX
          by korn88
          Hi all! I'm learning so please be patient with me.

          My LG OLED55BX decided to not turn on anymore after a bit more than 3 years. I've read the forum quite a bit and have done some basic troubleshooting, but Iā€™m stuck and need help with the next steps.

          Symptoms:
          I turn on the TV and hear 1 relay click. Stand-by light blinks, light can be seen in optical connector, no image on screen and 3-5 seconds later another relay click sounds and TV turns off.

          What I've tried so far is:
          • Disconnected lower LVDS cable -> Optical connector light stays red, no second
          ...
          08-13-2024, 04:23 PM
        • Loading...
        • No more items.
        Working...