Hitachi UZ657200 Backlight/Power Supply Issue

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Rustler77
    New Member
    • Aug 2015
    • 4
    • Australia

    #1

    Hitachi UZ657200 Backlight/Power Supply Issue

    Hi All

    I have a Hitachi UZ657200 LED TV with a backlight issue. A few minutes after powering on the screen goes black. I can see the image if I shine a light on the screen and the sound works fine. If I unplug the power for 5 minutes and then connect it again it works fine for a little while before the same thing happens. The longer I leave it unplugged the longer it will last before it happens again. The power supply PCB has an electrical hum in the highlighted area on the attached image. When the backlight fails it turners to more of a quiet crackling noise. I replaced the bridge rectifier in this area but the TV behaves exactly the same.

    All help appreciated.
    Attached Files
  • diif
    Badcaps Legend
    • Feb 2014
    • 6978
    • England

    #2
    Re: Hitachi UZ657200 Backlight/Power Supply Issue

    It's more likely to be a failing LED, turn down the backlight and see if the TV stays on longer.

    Comment

    • Rustler77
      New Member
      • Aug 2015
      • 4
      • Australia

      #3
      Re: Hitachi UZ657200 Backlight/Power Supply Issue

      Hi diif

      I plugged it back in after being disconnected for 3 hours, turned the brightness to 0 and it only lasted about 2 min. This was below average for a cold start.

      Comment

      Related Topics

      Collapse

      Working...