GJ2C LED Tester coil part

Plurxtc1

Senior Member

Join Date: Oct 2014

Posts: 136

Country: USA
#1

GJ2C LED Tester coil part

10-02-2021, 05:32 PM

I got an LED tester that the voltage keeps fluctuating from 0 - 300V before placing the probe on the LED strip. I would have to orientate the tester in a way it held the charge to 300V. I got annoyed and pulled it open and a pin from the coil is loose. Any idea what this part is? I'd hate to spend $44 to replace it from shopjimmy if I can replace it that part for a few bucks.
Attached Files
Tags: None
diif

Badcaps Legend

Join Date: Feb 2014

Posts: 6978

Country: England
#2

10-02-2021, 05:41 PM

Re: GJ2C LED Tester coil part

It's just the legs that have snapped. Snip a couple of leads off a resistor/capacitor, solder them through the holes and solder the coil on.
Comment

Previous template Next

What part is this coil from a MacBook A2681 ?

by waterchill

Hi everyone

I'm struggling to point out what part is this? It is a coil, but the parameters say: 10OHM - 50% - 1A - 0.05Ohm

So it is a coil with 0201 dimensions, 1A max current, 0.05ohm resistance but what is 10ohm? For a coil we need specs like 1uH or so.

IAny ideas? It is from a MacBook A2681

Thank you...
- Channel: Troubleshooting Laptops, Tablets, and Mobile Devices
08-08-2024, 01:46 AM
Finding the wrong part at a loooong led strip, part works fine, part flickers, all parallel...

by edugimeno

Hi There!
I'm trying to help my friend who owns a restaurant be just bought.
He has a very long LED strip running along all the walls and columns. The strip is attached facing down 2in above the floor, using a wall panel that ends in a metal rail that finishes the panel underneath
It's stuck using, I guess, the 2 sided tape that comes with the strip
The issue is that like 1/2 of the full length, including 1/2 one wall, another entire wall, and one column, flickers after 4 or 5 minutes ON. Particularly it flashes staying OFF most of the time and flashing ON for 1 tenth...
- Channel: General Electronics Technical Discussion
09-05-2024, 09:34 AM
iPad Pro A1876 SHORT Part Identify Help Needed

by G-Sting

So My iPad was not charging and booting up . i went to a local technician and he checked with thermal and this Part marked in 1st Photo is Short.
So then i went on to boardview and downloaded the schematics and identified this part in 2nd Photo. Now i am confused what exactly is the part called ? where should i get this from ?

i contacted my technician and he sent me his BoardVIew screenshot in 3rd Photo. In his Boardview the part is called X2826.... Something

SO My main concern is what part should i order what should i search the name for ?
on Ipad...

4 Photos
- Channel: Troubleshooting Laptops, Tablets, and Mobile Devices
05-15-2025, 09:30 AM
Casing Power MPT-301 [PCB ATX9806b-p REV: A3]

by momaka

This one should make @Pentium4 smile (if he is still reading BCN forums) – I got a new old stock / open box Casing Power MPT-301 PSU on eBay for $4 total.

Yes, it’s a very generic-looking box, but the manufacturer isn’t (at least not back in the days), which is…

Macron Power Technology Co. LTD.

Let’s look at the PSU itself.

The shell/case also appears quite generic, like many “sold-with-the-PC-case” units. However, the shell is well-formed and has decent steel thickness. In terms of...
- Channel: Troubleshooting Power Supplies and Power Supply Design
06-02-2021, 10:05 PM
Help finding part F7140 fuse by the ppbus_3GH coil

by Dale65

Hi , Can anyone tell me what the part # is and where to purchase the L7140 fuse by the ppbus_3GH coil for MacBook Air 820-00165-a ?

Thanks
- Channel: Troubleshooting Laptops, Tablets, and Mobile Devices
06-22-2022, 03:16 PM
Loading...
No more items.

GJ2C LED Tester coil part

GJ2C LED Tester coil part

Comment

Related Topics