Philips 55PFL6008K/12 QFU1.2E dead

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • sopik78
    Badcaps Veteran
    • Nov 2013
    • 517
    • Czech Republic
    #1

    Philips 55PFL6008K/12 QFU1.2E dead

    Hello good people,

    please help me with TV Philips 55PFL556008K/12 chassis QFU1.2E with no reaction to switch on or any key on RC. No LED flashing.

    On main board I can read 1.1V, 1.5V, 3.4V, 5V, 12.2V, when plugged to AC, the power consumption starts from 0W to about 20W, then drops to 16W and after while to 0W. CPU is warming up a little bit.

    I guess the power supply board is OK and problem is on main board.

    What should I check?

    The manin board code is 3104 303 54946 B, 3104 313 66186 B
    Tags: None
    • dick_barton
      Badcaps Legend
      • Aug 2015
      • 6642
      • Wales
      #2
      Re: Philips 55PFL6008K/12 QFU1.2E dead

      There is a manual available that you could read through
      https://www.manualslib.com/download/...l8008k-12.html
      Willing to help but I'm no expert.

        Comment

        • dick_barton
          Badcaps Legend
          • Aug 2015
          • 6642
          • Wales
          #3
          Re: Philips 55PFL6008K/12 QFU1.2E dead

          According to page 58 you appear to have all the voltages. Is there absolutely no other signs of life? Is the digital audio led output on the mainboard on?
          There does appear to be an awful lot of fuses shown in the schematics that would be worth checking out.
          Last edited by dick_barton; 04-03-2021, 04:57 AM.
          Willing to help but I'm no expert.

            Comment

            • sopik78
              Badcaps Veteran
              • Nov 2013
              • 517
              • Czech Republic
              #4
              Re: Philips 55PFL6008K/12 QFU1.2E dead

              Yes, digital audio LED lights for a while when plugged in AC and that voltage rails start up.

                Comment

                • sopik78
                  Badcaps Veteran
                  • Nov 2013
                  • 517
                  • Czech Republic
                  #5
                  Re: Philips 55PFL6008K/12 QFU1.2E dead

                  Any idea what the problem is?

                    Comment

                    • kas49
                      Member
                      • Nov 2019
                      • 10
                      • France
                      #6
                      Re: Philips 55PFL6008K/12 QFU1.2E dead

                      Old thread, same problem
                      Did you find the issue ??

                        Comment

                        Previous template Next

                        Related Topics

                        Collapse
                        • Tynan Dill
                          Vizio e601i-A3 - Has Sound and Display, But No Backlight - Bad Power Supply Board or Bad LED Bulbs ?
                          by Tynan Dill
                          I was given this TV from my great uncle. He said it just wouldn't turn on one day out of nowhere, replaced the TV, and gave it to me to possibly fix and use for myself.

                          Upon bringing it home and plugging it up, it showed a standby light.

                          I powered it on and without a flashlight, the display showed the "V" but the lighting is very dim, but visible.

                          The screen seems to blackout and stay black, but with a flashlight I can see the display.

                          With my Playstation 4 connected via HDMI, and running a game I can hear sound.

                          Assuming...
                          ORIGINAL POWER SUPPLY BOARD
                          7 Photos
                          11-22-2024, 01:46 PM
                        • k370
                          Yoga3 Pro-1370 Board NM-A321 DEAD no power at all
                          by k370
                          Hi everyone,

                          I have a NM-A321 board that is dead, with no power at all.

                          When I received the laptop, the +5VPMIC line was shorted. Removing the PU3 (ISL95905) solved the short, so I ordered and replaced the ISL.

                          With the new ISL, the short is gone, but still no voltages at all. I measured the following rails:
                          • +3VALW
                          • +5VAUX
                          • 1.2VSUS_PWRGD
                          • 3VALW_PGD
                          • 1.05VAUX_PWRGD

                          Additionally, the ISL95906 (PU3) is not getting any voltage on the VIN rail.

                          The only place on the board where I find any voltage is on the first MOSFETs, specifically:...
                          09-23-2024, 11:57 AM
                        • tuner2000i
                          Philips 65PUS8518/12 distorted image after main board replacement
                          by tuner2000i
                          hello everyone,

                          I don't normally do tv repairs but this is a case with my personal TV which got fried together with many other electronics in my house after a thunderstorm.

                          The TV is a Philips 65PUS8518/12 which had no power. I measured and concluded that the main board was probably fried through ethernet or hdmi. I found a board with same number 715GD328-M0F-B00-005Y (I had G) but from a 55PUS8518. The TV starts but the image is doubled, distorted. I need to set the panel code which is 016 according to the sticker on the back but I can not seem to do it.

                          ...
                          07-15-2025, 01:15 PM
                        • howardc64
                          TCL 55S425 few horizontal lines, potential failure on both side of panel/buffer board
                          by howardc64
                          All left and right refers to looking from rear of TV (or looking from front with TV upside down)
                          • TV came with vertical bars and no image. Found faulty TVS on left buffer board. Also replaced T-Con (may have damaged the original while hot air removing components, board has slight warp) and have full image but few horizontal lines on the screen. Some of the lines appears to be 2 pixel tall while others are 1 pixel tall.
                          • Disconnecting left and right buffer board potentially reveals problems on both sides with different signals (unless this T-Con require jumper like Samsung FB_TRDY1&3) Fault
                          ...
                          07-24-2025, 05:17 PM
                        • corrize
                          Nikon D5 – dead, power board issue ?
                          by corrize
                          Hello, the DSLR has heavyly fallen. It is dead : no sign of life and display nothing.

                          When it worked, it always displayed a card present state on LCD display, even when the battery is empty it display a empty battery symbol.
                          I found a dead fuse, I replaced it and a mosfet burnt, I changed it and another fuse burned. Nothing burned after. And I can't find any short circuit anywhere, it's weird.

                          Now, I try to understand how it works.

                          There is two boards (the little one on pictures has no component) : the first is a « power board » : managing...
                          04-03-2023, 09:13 AM
                        • Loading...
                        • No more items.
                        Working...