Re: Samsung ue49mu6120

Thanks lotas for your fast response
I damaged the SPI chip, will order a new W25Q40CL and let you know the outcome

Re: Samsung ue49mu6120

Hi Iotas, i have Samsung UE49MU6205
TV will not turn on, no standby light, power supply BN44-00807F
When i remove PSU cable from main board I get back lights
Main board BN41-02568B
Can you help me ??
Thanks for your contribution to our community...

Re: Philips 55PFL6008K/12 QFU1.2E dead

Old thread, same problem
Did you find the issue ??

Re: Toshiba 40L1333DG no power, blinking green/red power light fixed by flashing firm



Hi Piernov
That was my fastest TV repair ever for a non obvious failure
Thanks for this very informative post

Greetings from Grenoble Repair Café...

Re: 715G3812-P02-H20-003D Philips TV power supply

For future lurckers: to start PSU on the bench, you also need to load the 5V output

Connect a 1K resistor between 5V and S/B, and a 20R 1W resistor between 5V and GND
Vdd-S will jump from 5V to 13V

Re: SHARP LC-46LE730E - no backlight, no picture, no sound

For reference

I had the same problems:
- no sound no, no picture, no backlight
- all voltages are OK except BL_ON: 0V
- backlight turns on when BL_ON bridged to 5V

Look here
[url]https://www.apreslachat.com/forum/SHARP/LC-40LE730E/Resolution-probleme-defaut-allumage-diode-bleue-allumee/2124213/271744[/url]
here
[url]https://alpengeist-tvrepair.blogspot.com/2016/04/sharp-lc-40le540e-not-booting-bricked.html[/url]
here
[url]https://www.badcaps.net/forum/showthread.php?t=60900[/url]...