Channel Master CM-7500 DVR+

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • reeferman
    New Member
    • Feb 2013
    • 9
    • USA
    #1

    Channel Master CM-7500 DVR+

    Would anybody happen to have the schematic and component listing?
    I'm replacing U5 real time clock IC MCP7940M-I/SN and would like to check the associated components.

    Thanks in advance
    Phil
    Tags: None
    • reeferman
      New Member
      • Feb 2013
      • 9
      • USA
      #2
      Re: Channel Master CM-7500 DVR+

      I replaced U5 IC MCP7940M-I/SN (58 cents @ Mouser) and it is now keeping perfect time.

        Comment

        Previous template Next

        Related Topics

        Collapse
        • eccerr0r
          old X58 triple channel board... memtest86 memory speed?
          by eccerr0r
          Anyone run memory speed tests with an old X58-based triple channel 1st gen or any other >2 channel board? The one I have is a Gigabyte I think.

          Anyway I had four 4GB DDR3-1333 modules in the 6 memory slots and got around 11GB/sec memory speeds assuming that it went dual channel since it didn't have enough modules for triple channel. Now I stuck in two more 4GB modules, but they are DDR3-1600. I'm still getting 11GB/sec speeds according to memtest86...

          Just wondering, anyone do memory speed analysis on these triple (and higher) channel memory boards? Are there any...
          06-28-2025, 09:06 AM
        • spleenharvester
          Reverse engineering of 18650 4-channel tester
          by spleenharvester
          Hi friends

          I have reverse engineered this tester, schematic is attached and is complete except for capacitor values. These testers annoyingly have no model number but they are the ones you find on the first page of just about any website if you type in "18650 4-channel tester". There is also a 2-channel variant and a newer 8-channel variant. They are very cheap (about £15) and can measure voltage, current, internal resistance and capacity. They have a multicolour display for all these statistics. They also have terminal blocks so that if you want to use a breakout board...
          05-04-2025, 02:43 AM
        • afminguela
          No signal right output master channel - TRAKTOR KONTROL S4 MK1
          by afminguela
          HI,

          i have a S4 MK1 and suddenly don't have signal at the right channel main output, both in rcd and trs outputs.

          One day I was plugging all the set ( Macbook air+ traktor kontrol) and when I play the first song, right channel was silent.

          i made all the silly checklist (SW mapping, connectors, swapping channels...etc)
          and I concluded that is a hardware issue.

          As both physical outputs are affected, I suppose it's something at the mainboard BEFORE the split. No item seems to be burned, or broken, at sightsee.

          Does...
          05-11-2023, 05:58 AM
        • mikey5791
          Help on car amplifier only one channel works
          by mikey5791
          Hi all forum members,
          Fyi, i have been working on this old model PCT-4082 (4 channel car amplifier). The owner said only one channel is working.
          My initial finding is this amp originally use Toshiba 2SA1943 and 2SC5200 transistor for its output but after opening the top casing i found it used Toshiba A1941 (pnp)and C5198(npn). I desoldered all the 4 pairs transistors and found 1 piece A1941 open(tested "OL" on all legs) and replaced the 1st pair with 2SA1943 and 2SC5200, thats why you can see in the picture it is the bigger size transistor. The other A1941 and C5198 all...
          08-06-2025, 10:36 PM
        • dicky96
          American Audio VLP1500 Distorting on one channel
          by dicky96
          Hi guys I have a VLP1500 amplifier here - one channels works fine and the other channel distorts even at low volume settings

          Protection and Clip LED are off

          There is something wrong with the BIAS voltages around T16 and T18 (in particular) on the bad channel

          I tested all diodes and transistors in this area in circuit with diode mode - both channels seem identical. Same in resistance mode across all the resistors here.

          The output DC voltages on pin1 and pin8 of the 5532D dual op amp at the input of each amplifier module are the same, and the audio...
          07-13-2022, 05:25 AM
        • Loading...
        • No more items.
        Working...