Samsung PN60F5300AF Power supply help!
Hey so i have this plasma TV i'm trying to figure out. Tv is not turning on. the red stand by light comes on when plugged into the wall and when turned on it just flashes 5 times twice and then nothing. i unplugged the power supply from everything else except the wall and i have 4.2 volts at the ps-on pin and thats all. i tried jumping the ps-on pin to ground and nothing happens. there's no visible caps or fets blown up either. i did pull 4 of the biggest caps on the board and they are within spec.....any ideas where to check next?
-
-
Re: Samsung PN60F5300AF Power supply help!
PicsAttached Files -
-
Re: Samsung PN60F5300AF Power supply help!
The problem is likely on the Y-sus or Z-sus boards and not the power supply. Search the form with your model# and also check this thread https://www.badcaps.net/forum/showth...ht=PN60F5300AFLast edited by R_J; 02-19-2021, 08:17 PM.Comment
-
Re: Samsung PN60F5300AF Power supply help!
+10Comment
-
Re: Samsung PN60F5300AF Power supply help!
thanks for the reply. pulled it and it measured 8.44 uf. how do i find the tolerance? also pulled off two more from the same board and they measured 9.1 and 8.8. where do you recommend i order new ones from?Comment
-
Re: Samsung PN60F5300AF Power supply help!
Get them from ebay.Attached FilesComment
-
-
Re: Samsung PN60F5300AF Power supply help!
Well new 106's came in the mail today. Put them in and all is working. Thanks for the how to!!Comment
-
Re: Samsung PN60F5300AF Power supply help!
Good job!
Comment
-
Vizio e601i-A3 - Has Sound and Display, But No Backlight - Bad Power Supply Board or Bad LED Bulbs ?I was given this TV from my great uncle. He said it just wouldn't turn on one day out of nowhere, replaced the TV, and gave it to me to possibly fix and use for myself.
Upon bringing it home and plugging it up, it showed a standby light.
I powered it on and without a flashlight, the display showed the "V" but the lighting is very dim, but visible.
The screen seems to blackout and stay black, but with a flashlight I can see the display.
With my Playstation 4 connected via HDMI, and running a game I can hear sound.
Assuming... -
This specification for the Samsung Galaxy Book 2 Notebook can be useful for upgrading or repairing a laptop that is not working. As a community we are working through our specifications to add valuable data like the Galaxy Book 2 boardview and Galaxy Book 2 schematic. Our users have donated over 1 million documents which are being added to the site. This page will be updated soon with additional information. Alternatively you can request additional help from our users directly on the relevant badcaps forum. Please note that we offer no warranties that any specification, datasheet, or download...09-07-2024, 05:50 AM
-
This Samsung combined power supply and inverter was replaced a while ago from a Samsung 37inch LE37B530P7W TV. However I would like to repair this one.
I have replaced the Mosfets Q1820 and Q1821 ( FDPF7N50U) which were both blown and the fuse FM802S. The schematic for this power supply that is attached doesn't relate to this power supply as the driving transistors and diodes are D1830, D1831, D1832, D1833, Q1811 & Q1810 are nowhere on the schematic!
Does anyone know what the components for D1830, D1831, D1832, D1833, Q1811 & Q1810 should be? I ask as I did change the Mosfets... -
I have wanting to do this project for quite sometime now and I finally found a switching power supply that will work on this desoldering gun station ZD-915 that the original switching power supply took a shit and just was not worth trying to fix it because this switching power is not quite big enough to handle the heater element and the vacuum pump
One note when I tested the switching power supply and the voltage control board I noticed that this desoldering gun heat up much faster than the original switching power supply which I was really surprised by to the point that I might buy... -
Hello Everyone, this is my first post and I am excited to be a part of such a great community. I've been reading these forums for awhile and there really is some good friendly people here. No bashing and being rude like 90% of other forums Ive been to. Lets get to the good stuff.
I have two years of college in Electronics Engineering Technology. Ive been tinkering with electronics sine about 1990. I know enough just to be dangerous, so be gentle.
Make: Samsung
Model: UN60ES6500FXZA
Power Supply P/N: BN44-00525A
Symptoms: The TV was...
Comment