UE40ES6300 how to remove screen?

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • Newbie123
    Senior Member
    • Oct 2015
    • 58
    • uk
    #1

    UE40ES6300 how to remove screen?

    Hi all i had a UE40ES6300 slim edgelit led tv yesterday with a cracked screen when i took it apart the screen was welded to the tape/rubber underneath the screen.
    Of course the screen was cracked and i was only harvesting the parts for ebay sale so this was not a problem this time if i damaged the screen further..

    Can anybody please tell me if i could of moved the screen and kept the plastic frame underneath it in one piece?.

    If not what tool would you recommend to separate screens?
    I know a lot of newer screens are glued down many thanks in advance if you could add pictures of the tools you use and explain the method i would be very grateful cheers!.
    Tags: None
    • diif
      Badcaps Legend
      • Feb 2014
      • 6978
      • England
      #2
      Re: UE40ES6300 how to remove screen?

      Have a look here. https://www.badcaps.net/forum/showth...t=Glued+screen

        Comment

        Previous template Next

        Related Topics

        Collapse
        • howardc64
          A1312 (27” iMac 2009-2011) A1407 (Thunderbolt Display) A1316 (Cinema Display) Display Black Screen Repair
          by howardc64
          Problem

          This is an LG edge LED lit LCD Display. The LEDs are on the bottom edge of the display. There are 2 bars (left and right) Each bar has many LEDs and a 6 pin connector. Each pin drive several LEDs thus is the highest current flow / heat junction. The weak lead free solder gradually fails with thermal expansion/contraction cycling and increases resistance. PSU will compensate up to a point, then when the current is too high, PSU just shut down the backlight causing a dark display. I have even seen one which the connector just fell off as solder points became completely detached....
          08-04-2024, 10:36 PM
        • jean luc ferre
          acer aspire v5 571p touching screen cracked led blue of power indicator blinks 1s lighted 3s off.
          by jean luc ferre
          Hello,
          on this laptop acer aspire v571p the led of the power indicator blinks blue for periods of 1s lighted and 3s off after switch on and this indefinitely.
          i tried the hard reset, cmos reset, changing the ram without results.
          in order to reach the cmos battery i disassembled the laptop and did several mesures with my multimeter.
          The 19v, 5v, 3v are well established after the chip 5v-3v. the following signals : 3d3v_aux_kbc (which supplies the sio chip) and 3d3_s5 are well established also.
          but the signals: 3dv3_s0, pw_slp_s3# and pw_slp_s4 oscillate at the same...
          11-22-2025, 03:54 PM
        • Maxpower3
          Hantek 365 Remove screen on startup
          by Maxpower3
          every time I open the tool, I have the screen that appears
          and I am always in a hurry to use it so I click and it automatically sends me a link to the manufacturer.

          It annoys me lol.

          2 solutions to remove it.

          Either you remove pic.bmp and it no longer appears so no more links when clicking.

          ​
          or else you can modify the exe to remove the .bmp


          hope this helps users...
          01-15-2025, 03:24 PM
        • spice_disc
          Vizio TV M50-C1 reboot cycle and static on screen
          by spice_disc
          I'm currently trying to diagnose and fix my Vizio TV (Model M50-C1). I've tried a number of different basic solutions, but I'm trying to determine if my issue is currently a failing panel, T-Con board, or main board (or something else entirely) and whether or not it is worth my time to fix it. Details of the issue and what I've tried are below as well as why I think it is either a bad panel, T-Con board, or main board.

          The Issue: The TV will be on and working fine but after the TV is on for ~5-10 minutes the screen will freeze (with sound continuing) until the TV reboots itself. While...
          1 Photo
          09-08-2024, 02:37 PM
        • ipatch
          ipad pro 9.7" blew a SMD component while replacing the screen 🤦‍♂️
          by ipatch
          i have an ipad pro 9.7" (1st gen) A1674 where i replaced the screen, but never attached the screen to the frame/chassis (glued down) due to the ipad being previously dropped so the new screen would never fit in the frame properly. so i need flex/bend the chassis to eventually fix the new screen in properly. so i temporarily just applied blue tape around the edges of the screen to keep it in place. when watching videos with the ipad the screen started flicker, so i though maybe the new quasi cheap amz screen i purchased was going out. so i disconnected then reconnected with power still on,...
          08-24-2024, 02:36 PM
        • Loading...
        • No more items.
        Working...