LG 32 LE with half picture

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • provider10
    Senior Member
    • Mar 2016
    • 52
    • South Africa

    #1

    LG 32 LE with half picture

    Hi All

    I got an LG 32LE550 TV
    Half the screen has a picture the other side is blank with some vertical Lines on the Right Hand side
    I think it may be the panel.

    Hope someone else can set me right

    Thanks

    James
    Attached Files

    if you find these attachements useful please consider making a small donation to the site

  • Duranitron
    Badcaps Veteran
    • Jul 2014
    • 544
    • Philippines

    #2
    Re: LG 32 LE with half picture

    your correct its an lcd panel problem.. your best option is test all the components there hoping to find shorted cap or blown fuse try to press the flex if the panel response you've got a loose flex on glass bonding a temporary fix is just pressing it with something and hope it holds. . focus on the defective panel. putting new tcon there will not solve the problem
    Last edited by Duranitron; 10-23-2020, 07:11 AM.
    Never stop LEARNING because life never stops TEACHING!

    Comment

    Related Topics

    Collapse

    • kca
      LG 82UN8570AUD ~ TCON or PANEL?
      by kca
      Hello all ~

      Hope this finds you well. This LG 82UN8570AUD (April 2021 model) 4K UHD television has full audio capabilities but video is compromised / problematic.

      When I picked up this large LG tv it had a full black screen upon startup. Previous owner said it just went black one day. No popping sound or anything else of note.

      I got the display to work by taping off several traces of the right-hand side ribbon cable on the TCON that leads from TCON to PANEL. However, despite dozens and dozens of attempts to find the right combination / range of traces taped...
      08-31-2025, 06:38 AM
    • sigmeyer
      43UM7100PLB, no picture but have half picture when i disconnect 1 side of panel
      by sigmeyer
      Like the title says , this is a very interesting problem , never experienced this before so i thought i'd share and maybe get some help on this. So the problem is as such: TV comes on , some gibberish flashes on screen and the screen remains black , the owner of tv said he heard sound. Now i checked some things cleaned all connections first of all so i dont run in a circle. Then i disconnected one of the cables for the panel , and viola, the left side of screen comes on, then i tried to switch it , with left side disconnected and right connected. Same problem persists. I checked some voltages...
      09-09-2021, 10:30 AM
    • Tr0ll
      T-con suspect issue. Both ribbon cables no picture. One ribbon cable ok. (58pus8545)
      by Tr0ll
      Hi guys! I realized you have a lot of knowledge here so i am hoping you could point me in right direction with my odd issue.

      The Tv is a Philips 58PUS8545/12, it had no picture but working backlights.

      Original T-con:
      Opened the Tv and tested to unplug one ribbon cable at a time. With this test i could see that i got fine picture on both halves as long as there was only one ribbon cable connected, with two connected picture were gone.

      First replacement T-con:

      I thought it might be t-con and ordered new t-con from china(supposedly tested)...
      10-07-2023, 07:48 PM
    • Patrick501
      Philips 55PUS6704 no picture, backlight ok
      by Patrick501
      Hello,
      I'd like to repair a Philips 55PUS6704.
      It turns on and you can see the backlight, hear the sound but no picture.

      When I disconnect one of the T-con cables, half of the screen turns white.
      right cable disconnected= right side white
      left cable disconnected= left side white

      When I tape like 6 or 7 pins of one cable it looks like the picture attached. I already tried another T-con board without success.
      There are no shorts on the the mainbaord and the two lcd panel boards...at leat I couldn't find any.
      Also you can notice one single...
      11-12-2025, 08:46 AM
    • howardc64
      Samsung UN55NU7300F Curved TV. Half side backlight out. Fixed by just removing the rear snap cover
      by howardc64
      TV was fixed just after removing Samsung's rear snap cover.

      This curved TV's construction is rather interesting. When the snapped on back is removed, rest of the TV will relax the curvature. Top of LCD panel is loose as it wants to straighten out against the slightly curved bezel. Snapped back provide most of the curvature shape. So just simple disassembly of rear cover will allow the rest of the TV frame to relax its curvature. Thats probably what fixed it but no idea which connection. 4x LEDs are edge lit.

      Maybe PSU->backlight connector didn't have a good contact?...
      07-23-2025, 12:34 AM
    • Loading...
    • No more items.
    Working...