Re: TCON board compatibility question
Did you check the Gamma Voltages?
How about providing good clear straight shots of the whole T-CON board.
What is the history of the TV?
-
Re: TCON board compatibility question
I see, that makes a lot of sense, I wasn't aware firmware changed.
This is the error I get, screen looks washed out, colours are very unsaturated, everything else appears to work fine.
https://ibb.co/J7dy54M
I have removed the TCON board and visually inspected it and see no obvious faults. I have checked each capacitor, 0ohm fuse, fuse, inductor and all seem to be ok (tests onboard with multimeter).
I have tried replugging in all the flexi cables but there is no change.
I have done some basic checks to see what voltage it is getting and around the DCIN for the TCON I vaguely remember getting:
1.2v
8.7v
12v
17v
(I can reconfirm these if you like)
Out of curiosity, if I were to be unable to repair this one and buy a new V500DK1-CKS1 which came from a different model of TV then desolder and transfer over the firmware chips from my current TCON board, would this work?Leave a comment:
-
Re: TCON board compatibility question
different screen size are different T-CON firmware.. other things shape sockets etc identical.. search after your screen serial No , which i guess its V650dk1-ks2 rev. Ha
or post here your faults of the T-CON as here many members could help by test and repair.Leave a comment:
-
-
Re: TCON board compatibility question
you can use T-CON any from vestel TV brands with boards V500DK1-CKS1 but it should be for 65 screen as yours tv sizeLeave a comment:
-
TCON board compatibility question
Hi all just a quick question.
I have a TX65-AX802B Panasonic screen which has a faulty TCON board. The TCON board model number is V500DK1-CKS1. Can I use any other TCON with the same model number or are TCON boards matched specifically to the TV model number they are paired with?
ThanksLast edited by Themi; 09-11-2020, 12:39 PM.
-
Hi There,
This TV was auto switching off after few seconds with some vertical lines on the screen, so got a new TCON board and replaced it.
After replacing the TCON board it was working fine and i set it up with everything, used for few hours, then had the bright idea to update the software on it. During the update process, TV switched off and now no audio or video. No relay switch sound.
More Details
TV Model - LG OLED77G1PUA
Got the same exact TCON board from TVPartsToday and replaced it. But didnt transfer the EPPROM data (didnt... -
Vizio e601i-A3 - Has Sound and Display, But No Backlight - Bad Power Supply Board or Bad LED Bulbs ?I was given this TV from my great uncle. He said it just wouldn't turn on one day out of nowhere, replaced the TV, and gave it to me to possibly fix and use for myself.
Upon bringing it home and plugging it up, it showed a standby light.
I powered it on and without a flashlight, the display showed the "V" but the lighting is very dim, but visible.
The screen seems to blackout and stay black, but with a flashlight I can see the display.
With my Playstation 4 connected via HDMI, and running a game I can hear sound.
Assuming... -
This thread is about trying to get an Universal Main Board to work with a Sharp TCON and panel.
I have a Sharp LC-46D85UN TV that has had a main board issue. Since this model is from 2009, I am not able to find an exact replacement of the main board. Instead, I decided to see if I can future proof this tv by getting a Universal Main Board (T53U21.2) from China to work with the Sharp TCON (CPWBX4291TPZA) and panel. The universal main board supports a 8 bit dual channel LVDS interface whereas the TCON requires a 10 bit dual channel LVDS input. I have modded the LVDS connector to match... -
Hi, this is my personal laptop, which the original board (lets call it Board A) blew up PU8700 (TPS51486), making a hole on the board, i had left the laptop at my desk one day with the battery fully charged and didn't touch it for a week, but when i tried to turn it on it didn't
Thought the battery was dead, so i plugged in the charger then tried to power on, the power LED blinked once, charged LED still orange, unplugged the charger, plugged in again and I noticed the "magic smoke" smell, so i unplugged the charger, removed the back cover and saw the blown IC (the "magic... -
My main board is a 17MB12-2 and reads underneath that the following number 160807 LF,
Question is this board going to fit? ( see link) board is identical but from a different brand of tv but board number is same as in that it’s a 17mb12-2 board
Link to part here https://www.ebay.co.uk/itm/222990805243
This board is cheapest I can find. Also note:ordered one that was from a technica, an exact replacement, it arrived yesterday and when I fitted it it was a dead board, didn’t even show the standby light. When I piut the old board back in the tv worked but the issue...
Leave a comment: