philips 37pf8404 solarized image (changed as15f already)

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • reach7458
    New Member
    • Aug 2020
    • 4
    • Belgium

    #1

    philips 37pf8404 solarized image (changed as15f already)

    I got here an philips 37pf8404 with a solarized image. image one

    First guess its a bad as15f. so I replaced it with another. Same issues
    So I replaced it again with a rm5101. Same issues

    Problem is that is projecting a solarized image irregularly. When I pull the hdmi cable and put it back all is okay for a undetermined time. It also helps if I change the input from one hdmi port and back.

    One thing thats weird and I don't remember if it was the case with the previous tvs I repaired.

    When the image is solarized it doesn't affect the menu.
    Would it be someting else or would it be another as-15f chip (to solder)
    Attached Files
  • trunks81
    Badcaps Veteran
    • May 2020
    • 265
    • Nederland

    #2
    Re: philips 37pf8404 solarized image (changed as15f already)

    I would guess that the AS15F is not soldered probably,
    Allready seen this a couple of times

    Comment

    • reach7458
      New Member
      • Aug 2020
      • 4
      • Belgium

      #3
      Re: philips 37pf8404 solarized image (changed as15f already)

      Originally posted by trunks81
      I would guess that the AS15F is not soldered probably,
      Allready seen this a couple of times
      Yes that could be the case. But I replaced it with a rm5101 after that. Then I would have soldered chips wrong twice

      Comment

      • trunks81
        Badcaps Veteran
        • May 2020
        • 265
        • Nederland

        #4
        Re: philips 37pf8404 solarized image (changed as15f already)

        did you inspect the pins with an microscoop ?

        Comment

        • reach7458
          New Member
          • Aug 2020
          • 4
          • Belgium

          #5
          Re: philips 37pf8404 solarized image (changed as15f already)

          Originally posted by trunks81
          did you inspect the pins with an microscoop ?
          Yes I inspected all the pins with a microscope.
          I even checked the pins with the corresponding traces.

          But does a badly soldered as-15f give a good coloured menu and an bad image

          Comment

          • mmartell
            Badcaps Legend
            • Oct 2013
            • 3189
            • Canada

            #6
            Re: philips 37pf8404 solarized image (changed as15f already)

            Possible main board fault. If you can get one cheap enough try it.

            Comment

            • petehall347
              Badcaps Legend
              • Jan 2015
              • 4428
              • United Kingdom

              #7
              Re: philips 37pf8404 solarized image (changed as15f already)

              try resetting picture settings to default .. recently worked for me .

              Comment

              Related Topics

              Collapse

              • alro7779
                Philips 32PFL4901/F8 BA5DFGG0201 1 Backlight is present but no image
                by alro7779
                Hello there!
                Have this Philips with no image at all. When I plug it to the outlet, it turns on without pressing the power button, and after a moment, it turns off, then starts again. I checked the 12v and 3.3v voltages on the main board connector that goes to the T-con, but it only has the former (12v). Any clues, guys?...
                08-07-2025, 11:53 AM
              • tuner2000i
                Philips 65PUS8518/12 distorted image after main board replacement
                by tuner2000i
                hello everyone,

                I don't normally do tv repairs but this is a case with my personal TV which got fried together with many other electronics in my house after a thunderstorm.

                The TV is a Philips 65PUS8518/12 which had no power. I measured and concluded that the main board was probably fried through ethernet or hdmi. I found a board with same number 715GD328-M0F-B00-005Y (I had G) but from a 55PUS8518. The TV starts but the image is doubled, distorted. I need to set the panel code which is 016 according to the sticker on the back but I can not seem to do it.

                ...
                07-15-2025, 01:15 PM
              • malekservis
                Philips 58PUS8536/12 Backlight ok, no image
                by malekservis
                Hello,
                the TV turns on fine, seems to be working, but shows no image outside of a thick white vertical line as it turns on that also disappears almost instantly, and then it's just backlight. I've tried unplugging either side, but still can't get an image. I suspect it's a panel issue, but thought i'd ask some smarter people to confirm. I haven't found any weird readings, but then again i'm just randomly poking around with a multimeter.

                Any information would be appreciated....
                08-07-2024, 07:48 AM
              • Document Archive
                HP Elite Slice G2 + Image Load & Asset Tag Elite Slice i5-7500T Specification for Upgrade or Repair
                by Document Archive
                This specification for the HP Elite Slice G2 + Image Load & Asset Tag can be useful for upgrading or repairing a desktop PC that is not working. As a community we are working through our specifications to add valuable data like the Elite Slice G2 + Image Load & Asset Tag boardview and Elite Slice G2 + Image Load & Asset Tag schematic. Our users have donated over 1 million documents which are being added to the site. This page will be updated soon with additional information. Alternatively you can request additional help from our users directly on the relevant badcaps forum. Please...
                09-12-2024, 02:20 PM
              • Kartowl
                philips 47pfl6158k/12 image faded away, sound still coming from TV
                by Kartowl
                Hi, my TV image started showing those lines and the image faded away, but sound is still coming from it, what could be the cause and is it fixable? I thought it could be the tcon board but I red on the internet that it could be a failing panel

                ...
                04-23-2024, 12:57 AM
              • Loading...
              • No more items.
              Working...