just got this in for repair .i suspect its the led,s . checked power at the 2 backlight connectors .one goes to about 130v then drops to 50v .the other stays at 0v . when i swap backlight plugs over the 130v/50v swaps sides and also the 0v .
there is no flash . i was told the sound was out too .
barring stripping the panel to test the led.s is there any other testing to do apart from buying a backlight tester ?
there is no flash . i was told the sound was out too .
barring stripping the panel to test the led.s is there any other testing to do apart from buying a backlight tester ?
Comment