insignia ns-55l260a13 buttons not working

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • Eel_dahc
    Member
    • Apr 2017
    • 18
    • USA
    #1

    insignia ns-55l260a13 buttons not working

    Hello everyone.

    I bought a used insignia ns-55l260a13 that they said didn't work. It was $20. But it does work as I turned it on and left it on for an hour. The only thing that I found that's a problem is that one volume, one menu and one other button don't work. I took out the button board and cleaned that up as one button for sure wasn't working. After cleaning they seemed fine with the meter. Then I noticed a short, with the button board unplugged between KEY1 and ground on the connector so I followed the trace until I found a cap (red dot) that seems shorted.

    Do you think I would be safe just popping that off and see how it goes? I'm not a pro at this.

    Last edited by Eel_dahc; 02-20-2020, 08:31 PM.
    Tags: None
    • budm
      Badcaps Legend
      • Feb 2010
      • 40746
      • USA
      #2
      Re: insignia ns-55l260a13 buttons not working

      Well, remove the suspect cap and see if the shorts will go away or not, if it does then use the cap meter then you check the capacitance of the cap to the right after removing it to test the capacitance.
      Never stop learning
      Basic LCD TV and Monitor troubleshooting guides.
      http://www.badcaps.net/forum/showthr...956#post305956

      Voltage Regulator (LDO) testing:
      http://www.badcaps.net/forum/showthr...999#post300999

      Inverter testing using old CFL:
      http://www.badcaps.net/forum/showthr...er+testing+cfl

      Tear down pictures : Hit the ">" Show Albums and stories" on the left side
      http://s807.photobucket.com/user/budm/library/

      TV Factory reset codes listing:
      http://www.badcaps.net/forum/showthread.php?t=24809

        Comment

        • Eel_dahc
          Member
          • Apr 2017
          • 18
          • USA
          #3
          Re: insignia ns-55l260a13 buttons not working

          Took the cap out and a resistor that seemed shorted too. Those weren't it and the traces then ran under the metal shielding to one of the processors so I stopped there and just put it back together. It works with a remote. Thanks Budm

            Comment

            Previous template Next

            Related Topics

            Collapse
            • lafilipczyk
              lc 80le632u - Lamp error - TV working after counter reset via buttons
              by lafilipczyk
              Hello everyone, I just got my hands on a Sharp lc 80le632u TV that initially had the 1 short, 1 long blink sequence. That indicates a lamp error, however if I follow the isntructions to reset the error counter, the TV starts correctly: no missing LEDs everything lods just fine.

              I went through the process to get to the diagnostic screen, and got this ( attached).

              Since all LEDs are working correctly, and the TV seems to load fine after reset, that tells me that the power board and the LED strips are working correctly. Could this be a main board issue?

              Any...
              1 Photo
              07-29-2024, 11:00 AM
            • JakeShaw
              Sony HTG700 soundbar buttons not working.
              by JakeShaw
              Remote inputs are great and functional, but after 2 mainboard swaps the buttons have stopped working altogether, seemingly. The remote is required to power on and reset, but no amount of messing with it has gotten anything to respond.

              Checked plugs, everything is good, unhooked it and tried a different main, nothing. As everything else is functional I have no clue what else to do.

              Even replaced the button board itself, still no response.
              06-12-2023, 08:19 AM
            • TyMercer
              Can I flash a working BIOS from one computer to another of the same make, model, etc?
              by TyMercer
              Apologies if this is the wrong forum, but I'm not looking for a specific BIOS file, I'm trying to understand how one makes a clean BIOS file. So here's the background. I have 2 HP EliteDesk 800 g2 mini 35w pcs. One is working fine; the other doesn't have display out or working USB's nor does it have any flashing error lights. The CPU does get worm enough to cause the fan to spin up, so I think it's posting, but I just don't know. I had it working at one point but trouble started when I tried to put in a drive caddy that had a cooling fan on it. I thought it would be compatible but wasn't...
              11-13-2025, 09:39 PM
            • MMH3
              Dell Optiplex 5050 SFF - strange behavior and service_mode jumper not working anymore
              by MMH3
              Hello,

              i have many 5050sff. all of them, and how i experienced over many years for all about 250 DELLs goin through my hands, are fully flashable and can be serviced in any way when the service_mode jumper is set.
              Never ever i experienced problems with that.

              Now i have one 5050sff machine, where this jumper isnt working at all.
              I do not get the normal messge that the jumper is set when booting and a short test with FPT just confirms this. Everything is locked -->> EVEN for reading !?

              The history of the machine is that i used it in my office...
              03-23-2025, 09:28 PM
            • DynaxSC
              GIGABYTE X299 AORUS ULTRA GAMING - SATA PORTS 4-7 NOT WORKING ???
              by DynaxSC
              Hi,

              I have the above mentioned bord after repair, which was related to a lot of missing smd devices on the back of the board.
              There were almost 20 devices missing, caps, resistors and some diodes/mosfets.
              The board is generally working now, all PCIe ports are working, Windows installs normally.

              However I have a problem with SATA ports 4-7 (the board has 8 SATA ports) - disks are not beeing recognized by the BIOS neither by Windows (which is usually normal in case BIOS does not recognize them).
              The SATA 4-7 driver network is quite simple chipset<->buffers/drivers<->SATA...
              03-10-2025, 12:27 PM
            • Loading...
            • No more items.
            Working...