sharp lc-70c6500u half picture

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • vhehn@msn.com
    New Member
    • Jul 2019
    • 3
    • United States
    #1

    sharp lc-70c6500u half picture

    i have a 70 inch sharp tv. looking for ideas on repair. first i verified the tcom by swapping output cables. no change. then i removed the side driver tabs on the bad side of the screen. no change. what next?
    Attached Files

    if you find these attachements useful please consider making a small donation to the site

    Tags: None
    • budwich
      Badcaps Legend
      • Jul 2015
      • 3097
      • Canada
      #2
      Re: sharp lc-70c6500u half picture

      probably would have been wise to post BEFORE you removed the side tabs. :-( maybe check the components on the bottom edge board for the bad side for shorts or otherwise. Doesn't look good. Double check your cable seating at both ends.

        Comment

        • nomoresonys
          Badcaps Legend
          • Jan 2013
          • 12328
          • U.S.
          #3
          Re: sharp lc-70c6500u half picture

          What was original symptoms, was the display picture the same as it is now before the tab removal?

            Comment

            • vhehn@msn.com
              New Member
              • Jul 2019
              • 3
              • United States
              #4
              Re: sharp lc-70c6500u half picture

              Originally posted by nomoresonys
              What was original symptoms, was the display picture the same as it is now before the tab removal?
              same

                Comment

                • vhehn@msn.com
                  New Member
                  • Jul 2019
                  • 3
                  • United States
                  #5
                  Re: sharp lc-70c6500u half picture

                  Originally posted by budwich
                  probably would have been wise to post BEFORE you removed the side tabs. :-( maybe check the components on the bottom edge board for the bad side for shorts or otherwise. Doesn't look good. Double check your cable seating at both ends.
                  maybe. i have had luck fixing these with tab removal before. this time not so lucky.

                    Comment

                    Previous template Next

                    Related Topics

                    Collapse
                    • kca
                      LG 82UN8570AUD ~ TCON or PANEL?
                      by kca
                      Hello all ~

                      Hope this finds you well. This LG 82UN8570AUD (April 2021 model) 4K UHD television has full audio capabilities but video is compromised / problematic.

                      When I picked up this large LG tv it had a full black screen upon startup. Previous owner said it just went black one day. No popping sound or anything else of note.

                      I got the display to work by taping off several traces of the right-hand side ribbon cable on the TCON that leads from TCON to PANEL. However, despite dozens and dozens of attempts to find the right combination / range of traces taped...
                      08-31-2025, 06:38 AM
                    • sigmeyer
                      43UM7100PLB, no picture but have half picture when i disconnect 1 side of panel
                      by sigmeyer
                      Like the title says , this is a very interesting problem , never experienced this before so i thought i'd share and maybe get some help on this. So the problem is as such: TV comes on , some gibberish flashes on screen and the screen remains black , the owner of tv said he heard sound. Now i checked some things cleaned all connections first of all so i dont run in a circle. Then i disconnected one of the cables for the panel , and viola, the left side of screen comes on, then i tried to switch it , with left side disconnected and right connected. Same problem persists. I checked some voltages...
                      09-09-2021, 10:30 AM
                    • scubacamper
                      Sharp Aquos LC-70C6400U Half Screen Dark
                      by scubacamper
                      I found another post on this site the other day which has been very helpful in troubleshooting this issue I am having with my tv. The left half of the screen is dark, and the other half is VERY slow to generate it's image - and it only generates part of its image at that.
                      Based on this yt video, I have narrowed it down to an issue (short?) on the left side of the display, somewhere in the system of ribbon cables.
                      when I remove the bezel and the rear cover, I can get the image to display correctly by manipulating the ribbon cables on the left side which connects the left lower display...
                      https://youtu.be
                      05-03-2025, 12:19 PM
                    • Tr0ll
                      T-con suspect issue. Both ribbon cables no picture. One ribbon cable ok. (58pus8545)
                      by Tr0ll
                      Hi guys! I realized you have a lot of knowledge here so i am hoping you could point me in right direction with my odd issue.

                      The Tv is a Philips 58PUS8545/12, it had no picture but working backlights.

                      Original T-con:
                      Opened the Tv and tested to unplug one ribbon cable at a time. With this test i could see that i got fine picture on both halves as long as there was only one ribbon cable connected, with two connected picture were gone.

                      First replacement T-con:

                      I thought it might be t-con and ordered new t-con from china(supposedly tested)...
                      10-07-2023, 07:48 PM
                    • Patrick501
                      Philips 55PUS6704 no picture, backlight ok
                      by Patrick501
                      Hello,
                      I'd like to repair a Philips 55PUS6704.
                      It turns on and you can see the backlight, hear the sound but no picture.

                      When I disconnect one of the T-con cables, half of the screen turns white.
                      right cable disconnected= right side white
                      left cable disconnected= left side white

                      When I tape like 6 or 7 pins of one cable it looks like the picture attached. I already tried another T-con board without success.
                      There are no shorts on the the mainbaord and the two lcd panel boards...at leat I couldn't find any.
                      Also you can notice one single...
                      11-12-2025, 08:46 AM
                    • Loading...
                    • No more items.
                    Working...