Got this from some office, it was on the wall in conference until started acting strange. I took it off the wall and transported home in my minivan. Plugged in the power cord, and What?! It was working fine, except for a few small white spots on the screen. Didn't use it for a week or so.
Now, a week later, it acting weird again.
It is responding to remote, but so slow, that previous content is overlapping next screen in transition. After I press some button, it takes couple of minutes until it will get there, slowly.
Btw, I was able to do a factory reset with volume down and input buttons.
Didn't help any.
Here is some pictures I took with 2 minutes intervals.
Please help me fix it, please!
Now, a week later, it acting weird again.
It is responding to remote, but so slow, that previous content is overlapping next screen in transition. After I press some button, it takes couple of minutes until it will get there, slowly.
Btw, I was able to do a factory reset with volume down and input buttons.
Didn't help any.
Here is some pictures I took with 2 minutes intervals.
Please help me fix it, please!
Attached Files
Comment