Hay everyone. Working on Visio E322VL. Could someone tell me where the eeprom is located and number, is it U18,U21? . My Board number is 3632-1312-0150-3B . Would it be under the tin square cover. There is a U21 top left side of board with chip number 49536M A09614.
-
-
Visio E601i-A3
Tv powers on and input is able to be selected/used, but the on screen menu closes as soon as it is opened and the there are some periodic "glitches" of the on screen menus in relation to position and size. I have tried all the system resets,but because the menus are not usable, i was unsuccessful. Does this seem like a panel issue? Odd that it only affects the menus and not the main input picture. I have already tried disconnecting front panel buttons assuming one was stuck down causing the input to continually be scanned or similar.
https://www.youtube.co... -
Hello, a pleasure to join the community!
I have tried to program this EPROM from a laptop, the W25R128JWSIQ.
I tried using the CH341A, but it does not have support for this chip. Is there any programmer that can detect it so I can burn the bin file?
-
Hi has anyone got the latest software for the TL866CS MiniPro EPROM programmer version 03.2.86 is installed now i have tried the update site in the programmer software but it wont connect to their website i am running windows 10
Edit found this site programmer works now http://www.xgecu.com/EN/Index.html -
Hi guys, I already have a TLL866CS and it has proved a very good tool, I love it and find the software very easy to use but it does not program 1.8V chips.
I know there is a 1.8V adapter for the TL866
https://es.aliexpress.com/item/10050...46588439%22%7D
But if I get one of these do I need to install a...
Comment