eprom

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • nosugartonight
    Senior Member
    • Jan 2018
    • 107
    • united states

    #1

    eprom

    Hay everyone. Working on Visio E322VL. Could someone tell me where the eeprom is located and number, is it U18,U21? . My Board number is 3632-1312-0150-3B . Would it be under the tin square cover. There is a U21 top left side of board with chip number 49536M A09614.
  • nosugartonight
    Senior Member
    • Jan 2018
    • 107
    • united states

    #2
    Re: eprom

    Here are some photos, thanks for any help
    Attached Files

    Comment

    • nomoresonys
      Badcaps Legend
      • Jan 2013
      • 12210
      • U.S.

      #3
      Re: eprom

      U18

      Comment

      • nosugartonight
        Senior Member
        • Jan 2018
        • 107
        • united states

        #4
        Re: eprom

        Ok, do you know where at on the board u18 is located

        Comment

        • ducky29
          Badcaps Veteran
          • Dec 2015
          • 370
          • Europe

          #5
          Re: eprom

          Inside the metal shielding, on the bottom left corner, next to the tuner.

          Comment

          Related Topics

          Collapse

          • dicky96
            Best 1.8V Eprom Programmer?
            by dicky96
            Hi guys, I already have a TLL866CS and it has proved a very good tool, I love it and find the software very easy to use but it does not program 1.8V chips.

            I know there is a 1.8V adapter for the TL866
            https://es.aliexpress.com/item/10050...46588439%22%7D

            But if I get one of these do I need to install a...
            09-29-2021, 07:10 AM
          • REBZ
            Eprom canon mg3100
            by REBZ
            Saludos colegas, simplemente deseo compartir 3 respaldos de la eprom canon g3100.
            Por si a alguien le sirven. A mi solo me funciono el primer par de archivos, ya que 1 de las spi flash era diferente.
            Solo descompriman y reprogramen; yo use el tl866 plus.
            el archivo de 8mb es para el lado del jack usb y el archivo de 2 mb es para el lado contrario.
            ..........................................................................................................
            Greetings colleagues, I just want to share 3 backups of the canon g3100 eprom.
            In case someone is useful....
            03-16-2022, 06:14 PM
          • Camarada78
            Boss delay DD-3 (square ship taiwan) problem
            by Camarada78
            I have a Boss DD-3 (square chip taiwan version) in my bench with a very weird problem. I found no similar problem online, nor a solution for it. It is driving me nuts.

            It passes sound on bypass no problem but as i turn it on it has a constant a noise (that can be clearly shaped by Delay Time, Volume and Mode, but very subtle by Feedback).

            - sounds ok on bypass
            - noise is there even without input connected.
            - all electrolitic caps were changed (!)
            - all tantalum caps were checked, ok.
            - most ceramics were cheked. too many to keep track....
            05-08-2023, 07:44 AM
          • diegito11
            Eprom TD System TD40DLT1F
            by diegito11
            Hi, good afternoon, I'm looking for the eprom of this TV model, I can't find it anywhere.
            TD System TD40DLT1F
            I would appreciate any partner who has these files....
            04-16-2023, 12:08 PM
          • mc900fthanna
            Visio M70-C3 LED replacement strips
            by mc900fthanna
            So... I have the patchy back light issue with my Visio M70, meaning some light up, others do not. I finally got around to testing the LED driver board and found that was not the issue (swapped another one in and the same issue persisted) and I am considering if i dare dive deeper into this TV and go after the LED strips.

            Right away i see that they don't seem to stock them anywhere out there (E700DLB0016-002) is a part number that i see a you tube / seller guy list out. He has a nice video of how to get into my exact TV out there: https://www.youtube.com/watch?v=0AcUPiN83Tg
            ...
            11-28-2022, 03:03 PM
          • Loading...
          • No more items.
          Working...