Hi I have this Lg Tv When start up is ok pic and sound after minutes not have pic sound ok and light leds go of . In the board supply mod EAX64427101 have an yelow led LD 701 flashing 4 times What problem is this ?
Lg42 ls 5600
Collapse
X
-
Re: Lg42 ls 5600
Ever figure this out? I am having the same problem on the same board. -
Re: Lg42 ls 5600
See if you can turn down the backlights, NOT brightness, see if the tv stays on longer, if it does it's more than likely problem with led/s in the backlights.Last edited by nomoresonys; 10-17-2019, 07:44 PM.Comment
-
Re: Lg42 ls 5600
Can we at least see the whole backside of the TV showing all the boards and also the pictures of the whole power supply board?
Did you do any Voltage testing at all?Never stop learning
Basic LCD TV and Monitor troubleshooting guides.
http://www.badcaps.net/forum/showthr...956#post305956
Voltage Regulator (LDO) testing:
http://www.badcaps.net/forum/showthr...999#post300999
Inverter testing using old CFL:
http://www.badcaps.net/forum/showthr...er+testing+cfl
Tear down pictures : Hit the ">" Show Albums and stories" on the left side
http://s807.photobucket.com/user/budm/library/
TV Factory reset codes listing:
http://www.badcaps.net/forum/showthread.php?t=24809Comment
Related Topics
Collapse
-
so i took out one of my spare gigabyte ep35-ds3r mobos from storage for use to do some cpu, ram and video card testing of stuff i bought from ebay and got for free from momaka. he bought 50 e8400 cpus for cheap from ebay some years ago and i decided to help him relieve him of some of his supply since he had waaaay too many!!
what did we say about hoarding too much stuff and depriving others of them?! *cough* socialism *cough* lol!
i had to blow some dust off the board and heatsinks with the datavac as i didnt clean it up before putting it in storage. after finishing...-
Channel: General Computer & Tech Discussion
-
-
by mecha1166KDL-60EX500. Comes on fine, sound is fine, backlights come on. Blank screen. Already tried reset POWER/VOL-. Anyone else have this problem? Possibly bad T-Con RUNTK4244ZZ or panel? Could main or power supply cause this? There were 2 blown 560u 35v on power going to backlights but they were still working fine. Thanks for your help.
-
by stingerWhen I turn tv on, the backlights come on but there is no sound or picture. I have read that these tv's have problems with the panels going bad but the "no sound" has me questioning if the main board is bad. Is there a way to troubleshoot the main board to determine if that is the problem?
-
by LEECH666Good day ladies and gentleman!
I am currently trying to repair a Grundig Vision 9 37 9880 T USB LCD TV for a friend that has a weird audio problem. Basically everything works fine except for the heavily distorted sound when the Subwoofer module is connected and there is a buzzing sound coming from the PSU PCB.
This seems to be a rather rare TV so there is not much prior on topic help to be found however a service manual is available at the usual sources (Electro Tanya i.e.).
I think the PSU buzzing comes from one of the coils near the bridge rectifier but... -
AMD Radeon RX 5600 XT (5600XT) Schematic & Board View
The Radeon RX 5600 XT is a performance-segment graphics card by AMD, launched on January 21st, 2020. Built on the 7 nm process, and based on the Navi 10 graphics processor, in its Navi 10 XLE variant, the card supports DirectX 12. This ensures that all modern games will run on Radeon RX 5600 XT. The Navi 10 graphics processor is an average sized chip with a die area of 251 mm² and 10,300 million transistors. Unlike the fully unlocked Radeon RX 5700 XT, which uses the same GPU but has all 2560 shaders enabled, AMD has disabled...-
Channel: Schematics and Boardviews
10-01-2024, 10:42 AM -
- Loading...
- No more items.
Comment