Re: samsung 55ru7409 no power
At this point you need to get the P/N of the SMPS IC ICM801S so you can look up the spec sheet to find out which pin is the VCC pin and then find out if it has startup VCC for it to run or not.
BTW, the rectifier diodes in the cold side are OK?
And if you run the power supply board by itself without having it connected to the Main board, the output Voltages are still 0V, correct?
At this point you need to get the P/N of the SMPS IC ICM801S so you can look up the spec sheet to find out which pin is the VCC pin and then find out if it has startup VCC for it to run or not.
BTW, the rectifier diodes in the cold side are OK?
And if you run the power supply board by itself without having it connected to the Main board, the output Voltages are still 0V, correct?
Comment