Hisense LHD32D50TUK

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • LEEDASH
    Badcaps Veteran
    • Dec 2012
    • 481
    • Bedfordshire

    #1

    Hisense LHD32D50TUK

    Hello all,I'm having an issue, I need to do the first installation and it asking for a four pin code, also asks for the pin to reset the tv.
    or alternatively is there a factory reset I can perform to sort out this issue.
  • nomoresonys
    Badcaps Legend
    • Jan 2013
    • 12085
    • U.S.

    #2
    Re: Hisense LHD32D50TUK

    One here to try:

    Hit menu on the remote
    Tap right to enter the full menu
    Scroll down to sound
    Tap right and select Advanced Audio Settings
    Scroll down and highlight the Balance slider, make sure it is on 0
    Enter 1969 on your remote
    The menu will disappear and a green "M" will appear at the top left
    Hit menu on the remote, this time a service menu will appear. PS, may have to enter 1969 twice quickly.
    Last edited by nomoresonys; 03-26-2019, 09:01 AM.

    Comment

    • nomoresonys
      Badcaps Legend
      • Jan 2013
      • 12085
      • U.S.

      #3
      Re: Hisense LHD32D50TUK

      Resetting the TV You can choose to reset only the TV picture and audio settings to their original values, or perform a full factory reset to return the TV to the state it was in when you first unpacked and turned it on.Reset audio/video settingsTo reset only the TV picture and audio settings to their original values, navigate to Settings > System > Advanced system settings > Factory reset, and then highlight Reset TV audio/video settings. Read the information on the screen to make sure you understand what the reset operation does.To proceed with the reset operation, press [PLAY/PAUSE] three times in a row.Factory reset everythingA full factory reset returns the TV’s settings to their original state and removes all personally identifiable information from the TV. When finished, you must repeat Guided Setup, reconnecting to the Internet, re-linking your Roku account, and reloading any streaming channels. You also must repeat Antenna TV setup and input configuration. Factory reset is the recommended choice if you want to transfer the TV to another owner, and it is the only choice if you want to switch from store mode to home mode (if you inadvertently selected store mode during Guided Setup).To perform a factory reset, navigate to Settings > System > Advanced system settings > Factory reset, and then highlight Factory reset everything. Read the information on the screen to make sure you understand what this reset operation does.To proceed with the full factory reset, use the arrow buttons to enter the code displayed on the screen, and then select [OK] to proceed. When the factory reset operation completes, the TV restarts and displays the first Guided Setup screen.

      Comment

      • Diah
        Badcaps Legend
        • Feb 2013
        • 6344
        • Germany

        #4
        Re: Hisense LHD32D50TUK

        you have child lock on the set, go to service menu under category Factory scroll down to clean chip then his okay
        TV will restart with nothing on screen, the green M still on screen. put the TV in stand by for 5 second then turn it on again, the M will disaprat

        go to menu now ... system and do factory setting. the tv will restart for first installation menu

        Comment

        • nomoresonys
          Badcaps Legend
          • Jan 2013
          • 12085
          • U.S.

          #5
          Re: Hisense LHD32D50TUK

          Use 0532 for the parental lockout, then 1969 once or twice quickly if needed for factory reset, should do the trick.
          Last edited by nomoresonys; 03-26-2019, 09:20 AM.

          Comment

          Related Topics

          Collapse

          • masterm
            JVC LT-43C888 (manufactured by Vestel) does not start after trying factory reset, details below
            by masterm
            TV: JVC LT-43C888 (purchased in 2018). This is a smart TV with Netflix, Youtube, Freeview and other applications via 'Viewd' app store

            Problem with TV:
            - Netflix stopped working so i tried to do factory reset from the TV menu.
            - I confirmed on-screen but the factory reset did not happen even. It did not take me to 'first-time installation' screen as mentioned in the manual.
            - After waiting for some time, the TV went into a boot loop.
            - JVC logo comes on the screen and LED light flashes for some seconds, then it reboots again and the same thing happens
            ...
            04-30-2024, 03:03 AM
          • YG007
            Asus BIOS How To Reset To Default Settings?
            by YG007
            Hello... Where do I start. I have 2 questions/scenarios that might bring this laptop back to life, so here it goes!

            I have this laptop (Asus UX52VS) where I was flashing the BIOS to it and it froze during the process. I didn't have a reliable BIOS chip programmer at the time (It was a CH341A USB Programmer from Amazon where it took hours just to get the clamp on the chip and then every time I read, it gave me different results/corruption, and never would pass the verify test as no 2 reads were the same data), so I brought it to a shop. They had it for almost 2 months, but during...
            06-05-2023, 08:22 PM
          • Shpic
            DELL Inspiron 7567, Brick, BIOS restore to Factory settings issue
            by Shpic
            Hello everyone!

            I have a weird situation. I'll try to explain. I bought my laptop with Linux. After half a year I decided to install Windows 10 Pro x64 (I bought it). So, I wiped everything on my HHD drive and installed W10 without any problems. For 3 years the laptop worked well, but I decided to give it to another person. I started preparation to a new user. Firstly I restored Windows to default settings with wiping all user's data, it went well with no issues. And the last point was wrong for me, I decided to restore also BIOS (1.15.0) to factory default. After I pressed the...
            11-22-2021, 01:45 AM
          • pfrcom
            Reset/erase Hynix SC210 to factory default
            by pfrcom
            Some Googling made this seem straightforward, but it ain't necessarily so:

            First try was Hynix Drive Manager, supposed to be able to do PSID reset

            In Win7 x86 context, what shoddy software – this greeted me first time I clicked it from Start menu:


            After wild goose chase triggered by the OpenGL bit, I tried swapping graphics cards until penny dropped when it still objected to a Radeon HD3450

            How I got it work:

            1. Command prompt
            2. Change to install directory \Program Files\SK Hynix Drive Manager
            3....
            04-23-2022, 07:30 AM
          • mon2
            Hisense 55Q9G Android reset / factory firmware reload
            by mon2
            Hello. Have a 55" Hisense TV that starts to load the Android OS (no backlight issues) -> reaches the app screen where you can view the assorted icons including Netflix and always crashes at the same point just after this launch. If I quickly press the cursor buttons, the cursor can navigate to the settings menu but will power off just after a few seconds of this activity. Do not believe it is power related since the crash is very accurate in the boot cycle.

            After the OS 'crashes', the power does go off and the from white LED goes dark for about 20 seconds and then ON again....
            01-03-2024, 10:25 AM
          • Loading...
          • No more items.
          Working...