panasonic tx48cx400 difusser order

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • daphney
    Senior Member
    • Feb 2014
    • 93
    • uk
    #1

    panasonic tx48cx400 difusser order

    so i pulled tv apart to fix dead led & that is done now i can see leds shine threw the picture i was a dumbass & moved diffusers so at moment is hard plastic above leds then shiny then white have tried a few different ways & always same
    theres only 3 how hard can it be
    please help
    Tags: None
    • Diah
      Badcaps Legend
      • Feb 2013
      • 6363
      • Germany
      #2
      Re: panasonic tx48cx400 difusser order

      the hard plastic one, it had 2 surfaces one hard and other fine. the fine surface should be on the top

        Comment

        • R_J
          Badcaps Legend
          • Jun 2012
          • 9535
          • Canada
          #3
          Re: panasonic tx48cx400 difusser order

          The hard plastic should be the first, If it has small bumps on one side I believe that goes toward the led's, the other sheets I'm not sure of but you may have them in backwards, the shinny one should be a fresnel, (circle pattern on one side) That side goes toward the leds

            Comment

            Previous template Next

            Related Topics

            Collapse
            • signal.quest
              Panasonic LED TV TC-40A420U - Replaced Backlight LEDs but now no image/display or garbled
              by signal.quest
              I have a Panasonic LED TV TC-40A420U. The TV was given to me as an attempt to fix or throw out. I replaced the Backlight LEDs and now the screen lights up, but there is no image/display. If I play with the up/down buttons I can get the display to change from black to garbled. I can't get sound from HDMI but not sure of what input is selected. I have no remote control. When I connect a laptop to the HDMI ports it recognizes a Panasonic TV for display and sound output but I can't see or hear anything through the TV. This makes me think the mainboard is OK, but not sure if mainboard can...
              2 Photos
              03-17-2024, 10:14 AM
            • federalhouse
              **Need Help Unlocking BIOS and Hard Drive on Dell Precision 5820 Tower**
              by federalhouse
              Hi everyone,

              I'm in need of assistance with a Dell Precision 5820 Tower. The BIOS is locked with "Dell Security Manager," preventing access to the HDD-1 hard drive.


              **Background:**

              I recently purchased this Dell Precision 5820 Tower from a recycler who salvages equipment from abandoned office spaces. The computer was left behind by its previous owner and was password locked. Given that it can run Windows 11, I saw this as an opportunity to upgrade my setup.


              **What I've Tried So Far:**


              1. I accessed              ...
              1 Photo
              08-01-2024, 07:03 PM
            • jasakl
              Panasonic Toughbook HDDs with hard drive encryption - how to reuse them?
              by jasakl
              Dear community,

              i have searched the internet but i dont found a working solution for my problem:
              I have about 150 hard drives (mostely from hitachi 160gb HTS543216L9SA00) from Pansasonic CF-19 MK3 Notebooks.
              All devices had a BIOS Password and HDD encryption enabled.

              Now i try to reuse the HDDs, but i cant format them. I already tried windows Diskpart with argument "attributes disk clear readonly" but it says "cant delete" and i tryed several partition and low level formatters (like partition wizard, AOMEI and Easus).
              But all of...
              05-01-2024, 02:41 AM
            • howardc64
              A1312 (27” iMac 2009-2011) A1407 (Thunderbolt Display) A1316 (Cinema Display) Display Black Screen Repair
              by howardc64
              Problem

              This is an LG edge LED lit LCD Display. The LEDs are on the bottom edge of the display. There are 2 bars (left and right) Each bar has many LEDs and a 6 pin connector. Each pin drive several LEDs thus is the highest current flow / heat junction. The weak lead free solder gradually fails with thermal expansion/contraction cycling and increases resistance. PSU will compensate up to a point, then when the current is too high, PSU just shut down the backlight causing a dark display. I have even seen one which the connector just fell off as solder points became completely detached....
              08-04-2024, 10:36 PM
            • Andre Gilbert
              Panasonic TC-P55ST50 8 blinks then no blinks
              by Andre Gilbert
              Hello! yes I know there is already lots of information about this issue. I have a Panasonic TC-P55ST50 that originally displayed an 8-blink error code. Following the troubleshooting flowchart, I ended up replacing the SS board. However, even after replacing it, the issue persists. The TV turns on and stays on without displaying an image, and continuity is confirmed on all connectors. What am I missing hereπŸ€”?
              Ok Im a mechanical engineer ...but I thought I was able to follow a rather simple flowchart for electric troubleshooting πŸ˜‚.

              TV Model: Panasonic TC-P55ST50
              ...
              1 Photo
              11-20-2024, 08:52 PM
            • Loading...
            • No more items.
            Working...