I have above tv & the backlight had gone so I replaced leds on strip that failed with 1s I have used on many lg / vestel sets & they light with tester but not when tv is turned on
however they do complete the circuit as all other strips light when tv is on now
but my question is what are the correct leds I need to fit in this tv
thanks for your help
ps
3528 2835 3V 1w
are the 1s I fitted
Announcement
Collapse
No announcement yet.
User Profile
Collapse
-
sharp lc-50cfg6001 led?
-
panasonic tx48cx400 difusser order
so i pulled tv apart to fix dead led & that is done now i can see leds shine threw the picture i was a dumbass & moved diffusers so at moment is hard plastic above leds then shiny then white have tried a few different ways & always same
theres only 3 how hard can it be
please help
-
Re: samsung ps51f5500 any hope?
where the tabs attach to board? u mean for pressure thnx
-
Re: samsung ps51f5500 any hope?
so i removed metal plate that covers board tabs go to pressed abit & green block gone but other lines still there all pixels seem to flicker different colours in those lines that are left...
Leave a comment:
-
Re: samsung ps51f5500 any hope?
im unable to bend really i pulled out ribbon cable to board along bottom 1 at a time left side show 2 very faint lines when rest was black right side looked like this
no big chunk when green bit is...
Leave a comment:
-
samsung ps51f5500 any hope?
been given this tv & as you can see in pics this is why. is there any hope or is it a breaker?
thnx for help...
-
Re: Philips 42PFL7662d/12 sound, no picture. Backlight failure
i have ordered that already & resistor &caps that are listed in inverter mod pdf above just unsure what to get for this part...
STEP 3.5
Solder zenerdiode (TVS) on PNEL-T707A and PNEL-T708A:
-Solder zenerdiode TVS (33 V)on red indicated position.
thanks for help & info as always
Leave a comment:
-
Re: Philips 42PFL7662d/12 sound, no picture. Backlight failure
i no this is an old thread but i have just got 1 of these tvs with same fault i have found all parts & ordered seperately except the tvs 33v diode is this suitable SMAJ33A-E3/5A ?
or can some1 tell me wat i need please
many thnx as always
Leave a comment:
-
Re: samsung ps42c7 cable request
i need wires please start u own thread with u problem
thnx
Leave a comment:
-
Re: samsung ps42c7 cable request
does any1 have these spare please so i can use this tv thnx
much appreciated if so
Leave a comment:
-
-
Re: samsung le37a656a1f inverter fuse
wat voltage needed u reacon?
thnx
Leave a comment:
-
Re: samsung le37a656a1f inverter fuse
pic of full board is in middle fuse im needin
thnx...
Leave a comment:
-
samsung le37a656a1f inverter fuse
my friend was watchin this tv yesterday & picture went sound stayed on i have looked today & with torch u can see picture on inverter board f1 fuse has blown can some1 tell me wat 20 means im presumin size ? not sure tho
& voltage i need is 1amp correct?
thnx for your help...
-
Re: lg 50pc1d how to jumper on ctrl board
i pulled lvds cable out from control board noticed 2 pins bent & not pluged in tryed to straighten & snapped doh... but was a few red sparkles on screen
bought another board & is working fine nice picture
thanks for your help as always
Leave a comment:
-
lg 50pc1d how to jumper on ctrl board
i collected this tv other day was free so wats to lose i no some1 has been inside all caps on powerboard look new screen has a slight glow when on no pic tho i have checked fuses by ipms & all ok pulled buffers out top =15mohm bottom 1550kohm with test i seen on here then i put top1 in tried & noticed glow on screen then i seen this post
[url]https://www.badcaps.net/forum/showthread.php?t=16934[/url]
& says about jumper on p1 will generate test
what do i need to use & how?
thnx for your help & all the great infoi collected this tv other day was
-
-
Re: samsung ps42c7 cable request
hi 1 is 10pins other 12pins
thnx for your help...
Leave a comment:
-
samsung ps42c7 cable request
i had 3 of these at the sametime & worked threw them & fixed this is last1 but i have lost 2 cables circled in red
does any1 have that dont need ?? if so please pm me
thnx in advance for help...
-
Re: lg 50pg3000 sound no pic
i dont see any colour sound is fine get wat pics show for 5secs mayb2 lol gott b quick to take pics replaced top buffer with another no diff am thinkin mayb tcon coz of voltages but i not sure????????????
Leave a comment:
No activity results to display
Show More
Leave a comment: