Hello,
I have a power supply from a Haier tv that i am having problems with what to check next. The supply is a AD301M24-4N1. The supply turns on but with it connected to the mainboard the outputs are low. The 12v shows 6v, the16v shows 9v and the 24v shows 15v. i disconnected the supply completely and jumpered the ps/on pin to the 5v standby and all the voltages come up to spec.
If I connect a load to any of the outputs the voltages all drop back to the lower readings. Could some please advise me on this!
Thank You for your time!
Jerry
I have a power supply from a Haier tv that i am having problems with what to check next. The supply is a AD301M24-4N1. The supply turns on but with it connected to the mainboard the outputs are low. The 12v shows 6v, the16v shows 9v and the 24v shows 15v. i disconnected the supply completely and jumpered the ps/on pin to the 5v standby and all the voltages come up to spec.
If I connect a load to any of the outputs the voltages all drop back to the lower readings. Could some please advise me on this!
Thank You for your time!
Jerry
Comment