Microscope for SMD soldering.

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • pocketwatch62
    Senior Member
    • Jan 2013
    • 74
    • US

    #1

    Microscope for SMD soldering.

    Hi Everyone,

    Just looking for hints on smd soldering microscopes. If allowed, Can i ask what
    make and model you all would recommend?
  • DXseekerMO
    Badcaps Legend
    • Feb 2018
    • 1119
    • US

    #2
    Re: Microscope for SMD soldering.

    Try re-posting this question here:

    https://www.badcaps.net/forum/forumdisplay.php?f=33

    I've posted questions about equipment here and I get good replies. This is the TV repair part of the site.

    Have a Merry Christmas
    They call me......."threadkiller"

    Comment

    • R_J
      Badcaps Legend
      • Jun 2012
      • 9535
      • Canada

      #3
      Re: Microscope for SMD soldering.

      Put this into the search above "soldering microscopes"

      Comment

      • pocketwatch62
        Senior Member
        • Jan 2013
        • 74
        • US

        #4
        Re: Microscope for SMD soldering.

        Thanks Guys,

        I will do that.

        Merry Christmas

        Comment

        Related Topics

        Collapse

        • chegueva
          My Andonstar ADSM201 Microscope Review
          by chegueva
          Hi everyone. i'v started learning electronics before the corona hit so that's not very long time ago. but anyways i started with only a multi-meter then i started getting into micro-soldering and soldering in general, got myself hot air station a bench Power-supply and last but not least a microscope.
          About the microscope at first i just wanted to get those 15 usd USB digital microscopes to try but some people talked me outta of it and i decided to go for something better but not professional as i'm just starting out.
          So i had a choice between a binocular & camera , i wanted...
          08-14-2020, 11:08 AM
        • Azurain
          Elitebook 840 G5 Bios Chip Soldering Question
          by Azurain
          Hi everyone,

          I have an HP Elitebook 840 G5 that I am trying to get working again. I've removed the front bios chip (the 32mb one) and have run it through HP unlocker already. I've uploaded and verified the new bin, but am now experiencing an issue that has led me to believe I've been soldering the chip back to the motherboard incorrectly.

          Essentially, after re-soldering the chip back into its place and reassembling the laptop, the charging light immediately flashes orange and white and then shifts to a solid white. The capslock and numlock lights blink seven times...
          04-14-2023, 06:58 PM
        • lcdcaps1
          INSKAM Microscope USB port issue
          by lcdcaps1
          Hi
          All
          Does anyone have a INSKAM 7 inch LCD digital microscope
          I have a weird issue on the one I have where the USB port does not output enough power because when I connect a USB light or the ring light the light output is always really dim
          The ring light when connected to the microscope USB port is at the lowest brightness and turning the brightness knob makes no difference
          I have tried different cables and different USB power adapters

          I have confirmed there is nothing wrong with the ring light and the other USB light by plugging them into another...
          04-18-2025, 04:16 AM
        • Peter_1402
          Yihua 992DA+ Hot air gun and soldering rework station, burnt mark
          by Peter_1402
          Hi Everyone,
          I bought a Yihua 992DA+ hot air gun and soldering iron unit from a used market.
          1. Soldering iron works great
          2. There is a burnt mark on the hot air gun handle.
          I am a bit concern by the look of the melted plastic. I opened the hot air gun handle and took some readings with a multimeter.
          Heating element ~ 75ohm. (Similar reading taken from a spare heating element that came with the unit.)
          Thermocouple ~ 1.5ohm. (Similar reading from the spare heating element.)
          Reed switch tested ok with a magnet.
          From the above test, I can conclude...
          07-12-2025, 11:50 AM
        • chth96
          What soldering station should I purchase for 900M-TJ-I tip?
          by chth96
          hello.
          A few months ago,I have purchased 0.1mm Soldering Iron Tip of below aliexpress link,But I noticed that It is totally impossible to use this 0.1mm iron tip in the T12 soldering station
          https://ko.aliexpress.com/item/4001275635593.html
          Is there any good soldering station which is possible to use 900M-TJ-I tip and have inexpensive or reasonable price in aliexpress?
          Any reply would be appreciated.
          11-24-2023, 05:08 PM
        • Loading...
        • No more items.
        Working...