Re: My Andonstar ADSM201 Microscope Review
Still better than a small screen. the bigger the better as long as you don't lose too much sharpness....
Announcement
Collapse
No announcement yet.
User Profile
Collapse
-
Re: My Andonstar ADSM201 Microscope Review
Looks awesome
Adsm302 has a bigger screen & 60 fps is definitely a big plus. i might grab one just cause of those two things....
Leave a comment:
-
Re: My Andonstar ADSM201 Microscope Review
Around 200 gm maybe. should be ye but i can't get a hold of those , a tv mall mount is easy. also i wanna put some extra stuff like maybe some strong LED's , so i need that extra sturdiness.
I do laptops & some tablet repairs only so even with magnifying glass i should be able to do most of the jobs so this is more than enough for me....
Leave a comment:
-
Re: My Andonstar ADSM201 Microscope Review
I'm still working on a DIY solution to replace the metal stand cause its not helpful at all.Last edited by chegueva; 08-15-2020, 07:26 AM.
Leave a comment:
-
Re: My Andonstar ADSM201 Microscope Review
Here are some pictures i took...
Leave a comment:
-
My Andonstar ADSM201 Microscope Review
Hi everyone. i'v started learning electronics before the corona hit so that's not very long time ago. but anyways i started with only a multi-meter then i started getting into micro-soldering and soldering in general, got myself hot air station a bench Power-supply and last but not least a microscope.
About the microscope at first i just wanted to get those 15 usd USB digital microscopes to try but some people talked me outta of it and i decided to go for something better but not professional as i'm just starting out.
So i had a choice between a binocular & camera , i wanted...Last edited by chegueva; 08-14-2020, 11:09 AM.
-
Re: Laptop Blown fuse replacement
A polyswitch is a resettable fuse which means once blown it will take a few days to reset if the problem that caused this is fixed and a normal fuse just blows and i have to replace it again.
So if i'm missing something why i shouldn't use a normal fuse or even a current sensing resistor please tell me...
Leave a comment:
-
Re: Laptop Blown fuse replacement
Ye i'll get the right value but what about using a normal fuse insteaf of polyswitch...
Leave a comment:
-
Laptop Blown fuse replacement
Hello guys.
I have a sony Vaio that has a backlight issue , i found a fuse ( polyswitch 1A / 32V ) on the motherboard side being blown , so i used a wire to jumper to see if it would work and it did.
So my question now :
Do i need exact replacement for this fuse or can i use another normal fuse or even resistor ( low ohms like 5 or something) ?
LOoking forward to your answers. Cheerz...
-
Re: GL753VD shutdown during 3d test
Try to get your hands on the right wattage adapter first then we go from there.
Leave a comment:
-
Re: dell vostro 15 vegas/turis 15341-1 91n85 no start
You can either use an ultrasonic cleaner to clean the board from all water damage or some IPA alcohol but you need to make everything is well cleaned.
Then make sure to check for short & any component that may have gone bad ( burnt or blown ) ....
As for your IC getting hot , i suggest you replace that and then check that area for short after doing so.
Keep us updated
Leave a comment:
-
Re: Toshiba Satellite A300-1BV Turns on and off immediately
A nec tokin issue. yes replacing the caps under with 330uf should fix your problem.
4 SMD 330uF not 2 , there are some vids on youtube on how to do it. nothing to complicated
So replace those and post an updateLast edited by chegueva; 07-10-2020, 11:28 PM.
Leave a comment:
-
Re: New Members - please post your introductions here
Sorry for late intro but here i go.
Name is meh , from meh but i like electronics and repairing stuff is always fun. i'm at 0.01% learning progress and i hope someday i'll reach more % with the help of this community i hope.
cheerz everyone
Leave a comment:
-
Re: [TUTORIAL] fix asus bios with bios from asus web support
This is very good honestly. Thumbs up
Leave a comment:
-
-
No activity results to display
Show More
Leave a comment: